Broom 530 for sale in Hythe Marina Village United Kingdom

Broom 530 Overview

The Broom 530 is a further development of Broom Boats 50 OS range, offering a variety of additional attractive features. The 530 has a large transom bathing platform which is ideal for swimming, water sports, and also for carrying a tender. Secure chocks are fitted to the platform area, and the tender can be lifted on and off by the transom mounted crane.

The boat is located on the Solent, so please contact us to arrange viewing.

Features of "Walter Douglas"

"Walter Douglas" features the full aft deck option, offering a larger open deck space with plenty of room for a table and chairs. It is equipped with:

• Twin Caterpillar C12 (700hp) diesel engines
• 12 w Fischer Panda generator
• Waste holding tanks fitted to both toilets
• 10" Bowthruster
• VHF Raymarine 230E radio with DSC
• Raymarine ST6001
• Raymarine RL80C 10" colour radar
• Raymarine 631 -10" colour navigator/plotter with GPS
• Cooney Pedestal Deck Crane
• Full Teak Decks

With over 100 options individually specified by the current and only owner, this is a superb example of this Broom flagship model - rarely available on the market and in the condition as presented.

Manufacturer Provided Description

The Broom 530 is a further development of the 50 OS range, offering a variety of additional attractive features. The 530 has a large transom bathing platform which is ideal for swimming, water sports, and also for carrying a tender. Secure chocks can be fitted to the platform area, and the tender can be lifted on and off by either a transom mounted crane or a special lifting passerrelle. The aft deck of the 530 comes with a choice of layouts. First, there is the standard 50 OS enclosed cockpit (AC) or the full deck option (AD). This offers a larger open deck space with plenty of room for a table and chairs.

Craft Layout

• Forward Guest Cabin
  The forward guest cabin in the 530 is really superior with an ensuite shower and toilet compartment. There is plenty of space for storage together with overhead lockers.
• Forward Toilet
  A spacious forward heads is provided with sea toilet, moulded in washbasin and vanity unit with mixer tap. Shower compartment. 240 volt shaver point. Mirror. Towel rail, toilet paper holder plus toothbrush and glass holder.
• Mid Cabin
  Complete with two single berths, bedside table, wardrobe, and separate dressing room with storage cupboards. There is direct access to the heads compartment opposite to the mid cabin.
• Deck Saloon
  Dominating the centre of the craft is the deck saloon which has both a dining area and comfortable lounge seating. The raised dining area has excellent visibility yet is conventionally located near the galley. The powerful shaft driven diesel engines are located low down below the deck saloon. This enables the best possible stability and sea-going qualities. There is very good access to the engine room for routine maintenance, and for full service, the floor area can be removed easily.
• Aft Master Cabin
  The aft cabin is a real home from home with plenty of conventional storage and cupboard space.
• Aft Master Cabin Toilet
  Complete with sea toilet, moulded wash basin and vanity unit with a cupboard and mirror. Mixer tap for hot and cold water supply. 240 volt shaving point. Towel rail and toilet paper holder, plus toothbrush and glass holder.
• Shower Room
  Separate space with hot and cold water shower mixer tap. Moulded in seat and all easy clean surfaces.
• Upholstery and Interior Fabrics
  The choice of materials is very flexible to meet customers' requirements. Externally, vinyl covering is standard material in a single colour with piping. Internally, the owner is free to choose from the range of materials offered by our interior designers.
• One of the pleasures of owning a Broom boat is that you get to choose the colours and fabrics from a large range of quality materials, which stamps your own individual taste and lifestyle into the craft.
• At the design stage of the hull, the transom was given an immense amount of thought. The first aim was to provide a choice of methods to carry a tender, each one to allow for the variety of use and areas that the 530 can operate. This has been achieved by a choice of: An electric crane located on the port side. Having resolved the situation, attention was given to providing easy access by incorporating the built-in steps and finally the location of the picture windows which double as escape hatches.

Galley

At the heart of every serious cruising vessel is the galley. With the 50, Broom has surpassed their previous efforts to provide a huge working area which incorporates a fully electric system of hob and microwave combination oven. There is, of course, plenty of cupboard and storage space. A washer dryer comes as standard under the hob with a fridge freezer at the forward end of the galley.

Design

Designed by John Bennett, the hull and superstructure are manufactured by Broom's associate company Aquafibre. The mouldings are of excellent quality and are produced using hand laid chopped strand mat and woven rovings in Lloyds approved isopthalic gel coat and resin, over double brushed isophthalic gel coat all but eliminating the risk of osmosis. Substantial transverse and longitudinal stringers are incorporated throughout the hull for strength. The hull and deck joint is both riveted and bonded.

Standard Specification

• 8 heavy duty mooring cleats.
• Delta anchor in self-stowing bow roller.
• 20 fathoms of 9.5mm calibrated anchor chain.
• Electric anchor winch with dual control.
• Main shoreline with 240 volt ring main.
• Twin electric horn.
• 2 screen wipers. (variable speed)
• Screen washers.
• 1-12 volt socket in cockpit.
• VHF radio with aerial.
• Echo sounder.
• Speed and distance recorder.
• 2 compasses.
• 2 fuel gauges.
• Clock and barometer.
• Fresh water gauge.
• Automatic fire extinguisher in engine room.
• 3 hand held fire extinguishers.
• 5 electric bilge pumps.
• 1 hand bilge pump.
• Boat hook.
• Swim platform ladder with extension.
• Power steering system.
• Autopilot.
• 240v sockets in each cabin (dependent on layout).
• Adjustable trim tabs.
• Bow thruster.
• Radio player in deck saloon with 2 speakers.
• 2 lifebuoys.
• 4 mooring ropes.
• 8 large fenders.
• Fender baskets. (6 forward & 2 aft)
• Ensign & staff.
• Galley extractor fan.
• Engine room fan.
• Engine tool kit.
• 2 shaver points.
• Battery charger linked to shoreline.
• 12 kw diesel generator.
• 24 volt electrics.
• Battery state indicator.
• 2 electric toilets.
• Waste holding tank.
• 2 showers.
• 1 refrigerator.
• 1 freezer.
• Hot-air ducted heating system to each cabin.
• Electric hob unit.
• Microwave combination oven.
• Calorifier water heater with 240 v Immersion heater.
• Transom bathing platform.
• Aft deck shower.
• Stainless steel propeller shafts.
• Washer dryer in galley.
• Drinks fridge in saloon.
• 2 freestanding tub chairs in the saloon.
• Cathodic protection.
• 2 stainless fuel tanks (220 gals/ 1000 Ltrs each).
• Stainless steel water tank (130 gals/ 590 Ltrs).
• Stainless steel staunchion rails all round.
• Covers for deck equipment.
• Covers for lower front screens.
• Tinted glass in windows (except upper screens).
• Stainless steel frames to windows.
• Antifouling.
• Deck seats with cushions.
• Teak lay on aft deck.
• Provision for liferaft stowage.
• Table on aft deck.

Additional Inventory On This Vessel

Broom 530 motor cruiser built to standard specification
Additional charge for twin Caterpillar C12 (700hp) diesel engines in place of standard units.

1. Cherry timber interior in place of teak.
2. "Avonite" worksurface in galley together with surfaces in toilets.
3. Interior timber stained and hand polished.
4. Hot air heating to all cabins.
5. Allowance for non-supply of second forward shower and toilet.
6. Large bowl "Quiet Flush" toilets fitted with fresh and sea water flush.
7. Supply and fit combination microwave oven.
8. Galley extractor fan over hob.
9. 12 w Fischer Panda generator.
10. Radio/CD player with 6 disc changer and speakers on sundeck Head placed in aft hallway.
11. Waste holding tanks fitted to both toilets.
12. Underwater discharge from toilet tanks by electric pump.
13. Antifouling with dark blue boot top line.
14. 10" Bowthruster.
15. Stainless steel frames to windows.
16. Fender holders to each side of bow.
17. Fresh water screen washers.
18. Screen demisters.
19. Hot and cold water deck shower.
20. Electric winch with deck and helm controls.
21. Rudder indicator.
22. VHF Raymarine 230E radio with DSC. Second station/intercom in galley and loud hailer on mast.
23. Radio licence with MMSI number and programme.
24. Raymarine ST6001 plus autopilot with 53G corepack and type 2 pump.
25. Raymarine RL80C 10" colour radar with K)-N 48" open scanner.
26. Raymarine 631 -10" colour navigator/plotter with GPS and HSB2.
27. Bennett trim tabs with indicators.
28. Aft deck canopy extension.
29. Teak lay to aft decks.
30. Teak lay to bathing platform.
31. Teak lay to side decks.
32. British registration zero.
33. Compass swinging.
34. Signwriting.
35. Supply and install Cooney CE25 P300 pedestal deck crane and fabricate stainless steel RIB cradle retainers.
36. Supply and fit Navtex 6 plus weather fax in aft saloon hallway.
37. Supply and fit Rayline remote search light on mast.
38. Supply and fit TV aerial system with booster for saloon and aft cabin.
39. Supply and fit wine glasses in sideboard as 50/6.
40. Install owner supplied Yeoman plotter connected to 12 volt power supply and GPS interface.
41. Install owner supplied GPS unit on console with 12 volt power supply.
42. Three helm seats with storage under in cockpit.
43. Blue console with carbon fibre panels and blue helm wheel.
44. Gas struts to all locker lids.
45. Electric shorepower recoil system.
46. Wind indicator positioned beside VHF speaker.
47. Fit small chrome "BROOM" name on each side of mast.
48. Move VHF radio speaker in cockpit and fit next to VHF.
49. Fit owner supplied liferaft and cradle.
50. Allowance for non-supply of screen cover.
51. Stainless hand grab rail to each side of saloon roof.
52. Supply and install HFL reverse cycle air conditioning for saloon, aft, and two forward cabins.
53. Provide high gloss finish to interior wood with double strength stain. Cherry on vertical surfaces and Eucalyptus on horizontal surfaces in saloon, dinette, and aft cabin. Edgings to be in cherry. Decorative veneered banding along saloon sideboard and dinette table. Cherry to go between roof panels.
54. Fabricate stainless steel fiddle rails to fit on saloon sideboard, galley divider, and behind dinette seat; also in toilets and shower.
55. Construct saloon table as previous boat with fold out and twist top, hydraulic up and down system and decorative Compass Rose top.
56. Install owners supplied picture with light on aft saloon bulkhead.
57. Supply and fit dimmer switches to all roof lights in all cabins.
58. Supply and fit LED lights in saloon steps fore and aft.
59. Install burglar alarm with PIR.
60. Provide laminated handrails in saloon and galley.
61. Provide push button locks with gold centres with chrome collars. All door handles are gold with chrome collars and all lights to be gold except those in toilet, shower, and cockpit.
62. Supply and fit four ring ceramic hob, large fridge under with veneered door. Stainless front combination microwave oven. Twin stainless steel sinks with Avonite covers. Storage under cupboard shelf. Glass cutting area in worktop forward of sinks. Additional cupboard on forward saloon bulkhead and galley floor in teak and holly.
63. Fit owners Bose pro logic sound system in saloon.
64. Install Waeco fridge and freezer stack units in forward hallway.
65. Install small Eberspacher water boiler system with heated towel rails in aft toilet and shower and double coil hot water tank.
66. Install cockpit BBQ, fridge, and bin.
67. Provide centre cabin headboards and layout.
68. Provide entrance to laundry room from centre cabin.
69. Provide dark perspex rotating forward shower door.
70. Alter boat's wiring to remove forward electric panel.
71. Supply and fit aft cabin reading lights to each side of berth.
72. Supply and fit large safe.
73. Provide two retaining catches to aft engine room lift up access steps. One large saloon floor hatch.
74. Aft cabin headboard.
75. Provide washing line in aft shower.
76. Install owner supplied combination TV unit starboard over wardrobe.
77. Fabricate small upholstered box seat in place of standard stool f.o.c.
78. Fit owners crockery as necessary.
79. Supply and fit expansion tanks for engines.
80. Provide better lighting than the standard in engine room.
81. Supply and fit Mastervolt charger with charge control in aft cabin hallway.
82. Fit LED lights around cockpit.
83. Design new stainless mast.
84. Design and fit new canopy.
85. Supply and install two tube heaters to engine room.
86. Install owner's "E.P.I.R.B." unit.
87. Fit owner supplied satellite decoder unit, TV, DVD, and Bose sound system in saloon sideboard.
88. Design, manufacture, and fit engine room/side boarding ladder.
89. Position bowthruster switch in centre of console.
90. Provide slide out waste galley bin under hallway.
91. Fit owner supplied car phone system.
92. Modify stem head roller to accommodate a rope on each side.
93. Supply and fit deck wash from domestic supply with automatic release shut off valve, hose, and spray head.
94. Supply and fit two "Pop-Up" cleats to transom.
95. Main electric panel in grey with LED side lights.
96. Fit LED lights to aft hall steps, forward hall steps, and galley step.
97. Fabricate additional cockpit teak table.
98. Supply "Spur" rope cutters.
99. Fit optional port cockpit sink unit moulding with lid and optional BBQ moulding with lid.
100. Non-standard carpet, curtains, supply cushions. Bedcovers in same fabric as curtains fitted with shell design and quilted design tops.
101. Supply and fit five Imp concertina blinds in forward saloon. Additional charge for leather upholstery in saloon and dinette. Additional charge for blue hull in place of standard.