Hallberg-Rassy Mistral 33 for sale in Craobh Haven, Argyll and Bute United Kingdom

Boat Details

Swedish builders Hallberg Rassy are synonymous with super high quality, seaworthy cruising boats that stand head and shoulders above standard production cruising yachts.

Boat Details

Swedish builders Hallberg Rassy are synonymous with super high quality, seaworthy cruising boats that stand head and shoulders above standard production cruising yachts. This 1976 HR Mistral 33 from the design board of Olle Enderlein is no exception to the rule and with her beautiful traditional lines and undoubted build quality she presents a unique opportunity to own a slice of boat building history from one of the worlds most renowned boat builders. Sleeping up to six across her tradition solid mahogany interior 'Buttercup' has been well maintained and upgraded over the years. 

Currently lying at 'Croabh Marina' on the West Coast of Scotland please call our Kip Marina office to arrange an appointment to view.

360

Dimensions

Hull, Deck & Keel

• Hand laid GRP hull.
• Hand laid GRP deck, sandwich construction. 
• Burma Teak laid foredeck, side deck, stern deck and cockpit seats, all in good condition.
• Superstructure, rails and combings are built of selected Mahogany.
• The cabin top is sheathed in GRP.
• New cockpit combings and Teak capping rails made and fitted 2018.
• The keel is made up of a stub moulding with through bolted Iron ballast which is GRP sheathed. The last survey (2021) suggested epoxy coatings have been applied in the past.
• The hull has been freshly antifouled 2023.
• Full skeg hung rudder with encapsulated prop.
• Whitlock wheel steering with varnished timber wheel, mounted on a binnacle .

Deck Equipment

Stainless steel pulpit, pushpit with opening top bar and stanchion posts with twin guard wires. 

The deck is Teak laid with raised varnished Teak toe rail.

The cabin top has an opening deck hatch forward of the mast, port and starboard full length varnished Teak hand rails for security moving forward. The hatch has a sliding lid and bi-folding hatch board so it can be left partially open.

The cockpit is deep and attractive with teak combings and laid Teak seats. The mainsheet track is situated in front of the wheel steering for ease of handling.

Storage is in the form of 4 open fronted handy lockers 2 x port and starboard, there is a large full depth cockpit locker under the starboard seat, large Lazarette locker aft with Teak topped hinged lid and a locker under the helm seat to access the engine stop and stern tube greaser.  

• Single bow roller.
• 15kg Sowester anchor (CQR type) with chain.
• Danforth spare anchor.
• Central foredeck mooring cleat with two fairleads forward. Aft side deck mooring cleats with fairleads.
• Mooring warps and fenders.
• Outboard bracket.

• 2 x Lewmar 40 2 speed primary winches.
• 2 x Lewmar 25 2 speed secondary winches.
• 2 x Lewmar 16 Self tailing winches mounted on the coachroof with primary control lines lead aft through rope clutches.
• 2 x Enkes AR22 mast mounted winches.

Interior & Accommodation

Navigation Equipment

• 3 x Raymarine ST60 - Log / speed, depth and wind. Mounted to the port side of the hatch.
• Raymarine Dragonfly 5 chart plotter. Mounted at the helm.
• Simrad RD68 DSC VHF at nav. station.
• C.Path Venus binnacle mounted magnetic steering compass.

Machinery & Propulsion

• Volvo Penta MD2B raw water cooled, 25hp diesel engine. No. 27156.
• Shaft drive to 2 blade Bronze prop.
• Serviced in Sept 2023 by the owner.

Rig & Sails

• Selden silver anodised masthead rig with single inline spreaders
• Selden silver anodised boom
• The mast is well stayed with fore and aft lowers, cap shrouds forestay and twin backstays
• All standing rigging was replaced 2021
• In-mast furling
• Mast mounted adjustable pole track
• Whisker pole
• Roller furling headfoil system for Genoa
• Spinnaker pole

• In-mast furling mainsail
• Roller reefing headsail
• Spinnaker
• Storm Jib
• Sails are in nice order, age unknown but laundered by Owen Sails 2022 and maintained by them previously for this owner and previous owner.

• Full length Genoa tracks are set on the side rails and sheet outboard. 
• The mainsheet has an adjustable cockpit track.

ELECTRICAL SYSTEMS

• 12v dc ships electrics with distribution panel
• 1 x domestic (new 2022)
• 1 x engine battery with rotary isolator switch
• 230v ac shore power with dock cable
• 230v internal sockets
• 4kw inverter
• 3 x batteries for the inverter
• Both Mains and inverter systems have RCD protection
• Galvanic Isolator
• Victron 3 channel 30w charger for Inverter batteries
• Sterling battery charger for engine and service battery
• Sterling 3 channel split charge diode
• Led lighting
  

Audio Visual

• Blaupunkt Vancouver CD35 Radio CD player with 2 x Blaupunkt saloon speakers.
• LG TV with movable mount.

Plumbing & Tankage

• Water tank - Approx. 110L
• Fuel tank - Approx. 110L
• Pressurised cold water system.
• Both galley and heads sink also have mixer taps which heat water on demand via the inverter.
• Additional pressurised cold water supply to both sinks.

Canvas work

• Burgundy sprayhood.
• Burgundy wheel cover.
• Burgundy compass cover.
• 3/4 Burgundy winter cover which is supported by the mast/boom. 
• Heavy PVC overall cover with support frames.

Safety Equipment

Any safety equipment such as life raft's, Epirb's, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owner’s specific needs.

• Port and starboard navigation lights mounted on the pulpit and a stern light on the pushpit.
• 2 x fire extinguishers.
• Fire blanket.
• Horseshoe life buoy.

Ships Papers

• 2021 survey available.
• Bill of Sale to current (3rd) owner - April 2021.
• Title transfer document from 1st owner to 2nd owners.
• Purchase information for 1st owner confirming 12% VAT included in the purchase price.
• Ofcom license confirming Name of Vessel, MMSI and Call Sign.
• MCA Carving Marking Note and Carving Mark identified below in the saloon.
• YBDSA Tonnage and Measurement certificate 28 Oct 2021.
• Builders plate.