MM 45 Charter Catamaran Subchapter "T" - 49 Passenger for sale in United States of America for $1,250,000 (£952,526)

icon_grid_officon_grid_on
LOA
14 m
Price
$1,250,000 (£952,526)
Beam
7.3 m
Tax Status
Tax Paid
Keel
Centerboard
Year
2020
Hull Material
Composite
Boat Type
Sail
Broker Office
Morrelli & Melvin Design | Engineering | Yacht Sales
RB Ref
RB304949
Phone
-9495003440 / -9495003440
Broker
Morrelli & Melvin Design and Engineering
Contact Name
Mark Womble
mark.womble@morrellimelvin.com
Arrange Viewing
Contact Seller


About this MM 45 Charter Catamaran Subchapter "T" - 49 Passenger

This is a 45 foot day charter catamaran, designed and built to Subchapter "T" specifications, for 49 passenger use. Designed by Morrelli & Melvin, and built by Schooner Creek Boat Works, in Portland Oregon - this design represents the best in state-of-the-art design and construction.

Much thought went into making this vessel as strong and practical as possible - to absorb the punishment of high volume day charter business, to minimize down time - to be easily sailed, with short handed crew - and to sail off of the beach, if required.

Pricing reflects the vessel, as specified herein. However, the vessels are built to order - so customization is expected - and priced accordingly.

Specs Keel: Centerboard Dimensions LOA: 45 ft 4 in Beam: 24 ft 0 in LWL: 44 ft 6 in Dry Weight: 13600 lbs DETAILS Certified to USCG Sub Chapter “T” 49 passenger capacity

Specifications subject to change.

Hulls, decks, bulkheads and bridgedecks to be a composite of bi-directional and unidirectional Eglass and PVC core, utilizing infused vinylester resin. The hulls will be built on a faired female direct mold joined on hull centerline. Final fairing shall be done with “Duratec” vinylester primer, applied in sufficient thickness to form a water barrier beneath the waterline.

Two water tight bulkheads are installed in each hull, separating compartments at each extremity. Ring frames are installed in each hull on 5’ centers between bulkheads. Local laminate reinforcement is added to bow, the centerboard/dagger case trunk and rudder area for impact absorption.

Bulkheads to be installed on trapezoidal foam sections, to distribute compression loading. Monocoque hull and deck construction, with no mechanical fasteners.

Hull exterior finish:

- Hulls painted with “Awlgrip” linear polyurethane paint.

- Contrasting boot stripe and exterior hull shear stripe of “Awlgrip” LPU paint.

Deck bridgedeck finish:

- Non-skid surfaces with sprayed textured surface of “Awlgrip” LPU with admixed non-skid compound.

Deck Hardware:

Deck hardware, winches and furler, by Harken.

- Winches;(1) 40.2STA at mast for halyards; (1) 4:1 mainsheet at helm led to 46.2STA; (2) Jib sheeting at helm led to 46.2STA winches.

- Control lines and jib sheets led below deck to helm station.

- A companionway is installed in the port hull for direct access to the head. (7) additional deck hatches provided for access to hull and deck storage.

- Integral transom steps are fitted on both hulls, leading to swim/boarding platforms.

- Aft pivoting swim ladders will pivot down for water access at each swim step and pivot up to form a gate blocking off overboard access.

- The forward hulls are joined by an aluminum beam with pelican striker and trampoline attachments.

-Two additional aluminum compression struts run fore and aft and flank each side of an optional forward boarding ladder.

- Attachment points are fitted for the trampolines on struts. Additional trampoline attachments to be bonded to the hulls.

- Trampoline to be made of 2” wide webbing.

- Stainless steel stanchions with 1 1/4" stainless steel top tube and ¼” spectra intermediate lifelines.

- 8” stainless steel cleats provided for forward dock lines, aft dock lines, and springlines.

Steering and Foils:

-Twin spade or kick up rudders available.

- Steering system with single console mounted 30’’ SS wheel.

-Centerboard, keels or daggerboards available.

Rig:

- Mast is of 6061-T6 aluminum construction, tapered in the top section.

- Masthead crane is custom-welded aluminum, with provision for 2:1 main halyard.

- Welded hounds accommodate a single jib halyard.

- One set of tapered aluminum air foil section spreaders, with through-bar root and tip fittings for inner and outer diamonds.

- Articulating mast step is provided.

- Boom is of 6061-T6 aluminum construction, with custom-welded ends. Outboard end has provision for internal outhaul and two reefs, and is set up for a clew strap and clutches for the reefs.

- Mast, boom and spreaders are clear anodized.

- Headstay and cap shrouds are of 5/8” 1x19 wire. Superior diamonds are 12mm compact strand, inferior diamonds are 10mm compact strand. All turnbuckles and cables are 316 stainless steel.

- A Harken #4 roller furling unit is supplied.

Propulsion:

- Twin 50hp outboards on aft mounted sliding brackets

- Optional twin saildrive/direct-drive inboard diesels

201 Shipyard Way, Suite B Newport Beach, CA 92663 United States Toll-free Tel Email Us

Specifications

Dry Weight13600 lbs
LWL(m)13.56
DETAILS

Certified to USCG Sub Chapter “T” 49 passenger capacity

Specifications subject to change.

Hulls, decks, bulkheads and bridgedecks to be a composite of bi-directional and unidirectional Eglass and PVC core, utilizing infused vinylester resin. The hulls will be built on a faired female direct mold joined on hull centerline. Final fairing shall be done with “Duratec” vinylester primer, applied in sufficient thickness to form a water barrier beneath the waterline.

Two water tight bulkheads are installed in each hull, separating compartments at each extremity. Ring frames are installed in each hull on 5’ centers between bulkheads. Local laminate reinforcement is added to bow, the centerboard/dagger case trunk and rudder area for impact absorption.

Bulkheads to be installed on trapezoidal foam sections, to distribute compression loading. Monocoque hull and deck construction, with no mechanical fasteners.

Hull exterior finish:

- Hulls painted with “Awlgrip” linear polyurethane paint.

- Contrasting boot stripe and exterior hull shear stripe of “Awlgrip” LPU paint.

Deck bridgedeck finish:

- Non-skid surfaces with sprayed textured surface of “Awlgrip” LPU with admixed non-skid compound.

Deck Hardware:

Deck hardware, winches and furler, by Harken.

- Winches;(1) 40.2STA at mast for halyards; (1) 4:1 mainsheet at helm led to 46.2STA; (2) Jib sheeting at helm led to 46.2STA winches.

- Control lines and jib sheets led below deck to helm station.

- A companionway is installed in the port hull for direct access to the head. (7) additional deck hatches provided for access to hull and deck storage.

- Integral transom steps are fitted on both hulls, leading to swim/boarding platforms.

- Aft pivoting swim ladders will pivot down for water access at each swim step and pivot up to form a gate blocking off overboard access.

- The forward hulls are joined by an aluminum beam with pelican striker and trampoline attachments.

-Two additional aluminum compression struts run fore and aft and flank each side of an optional forward boarding ladder.

- Attachment points are fitted for the trampolines on struts. Additional trampoline attachments to be bonded to the hulls.

- Trampoline to be made of 2” wide webbing.

- Stainless steel stanchions with 1 1/4" stainless steel top tube and ¼” spectra intermediate lifelines.

- 8” stainless steel cleats provided for forward dock lines, aft dock lines, and springlines.

Steering and Foils:

-Twin spade or kick up rudders available.

- Steering system with single console mounted 30’’ SS wheel.

-Centerboard, keels or daggerboards available.

Rig:

- Mast is of 6061-T6 aluminum construction, tapered in the top section.

- Masthead crane is custom-welded aluminum, with provision for 2:1 main halyard.

- Welded hounds accommodate a single jib halyard.

- One set of tapered aluminum air foil section spreaders, with through-bar root and tip fittings for inner and outer diamonds.

- Articulating mast step is provided.

- Boom is of 6061-T6 aluminum construction, with custom-welded ends. Outboard end has provision for internal outhaul and two reefs, and is set up for a clew strap and clutches for the reefs.

- Mast, boom and spreaders are clear anodized.

- Headstay and cap shrouds are of 5/8” 1x19 wire. Superior diamonds are 12mm compact strand, inferior diamonds are 10mm compact strand. All turnbuckles and cables are 316 stainless steel.

- A Harken #4 roller furling unit is supplied.

Propulsion:

- Twin 50hp outboards on aft mounted sliding brackets

- Optional twin saildrive/direct-drive inboard diesels

201 Shipyard Way, Suite B Newport Beach, CA 92663 United States Toll-free 949-528-4030 Tel 949-500-3440 Email Us

SIMILAR BOATS FOR SALE

Fountaine Pajot Galathea 65 for sale in France for €950,000 (£855,571)

FOUNTAINE PAJOT Galathea 65 for sale, France

Length: 20 m
Year: 2009
£855,571
full specs and details on demand
Nautor's Swan Swan 54 for sale in France for €1,300,000 (£1,170,781)

NAUTOR'S SWAN Swan 54 for sale, France

Length: 16 m
Year: 2016
£1,170,781Tax paid
Hanse 675 for sale in  for €880,000 (£792,529)

HANSE 675 for sale,

Length: 21 m
Year: 2016
£792,529
Fully loaded Hanse 675 for sale. Contact us now for further information. Navigation electr...
CNB LAGOON 560 for sale in Spain for €960,000 (£864,577)

CNB LAGOON 560 for sale, Spain

Length: 17 m
Year: 2013
£864,577
Sails are in hydranet, with gennaker, there is also an hydraulic plateform, bow thruster, complet...
Xquisite Yachts X5 for sale in  for $1,299,000 (£989,865)

XQUISITE YACHTS X5 for sale,

Length: 15 m
Year: 2019
£989,865
X5 SAIL by XQUISITE YACHTS is the ultimate luxury yacht for cruisers, where safety and innovativ...
Bali BALI 5.4 for sale in Turkey for £1,090,000

BALI BALI 5.4 for sale, Turkey

Length: 17 m
Year: 2019
£1,090,000
Hull Length (m)16,8 Cabins 4+2 Beam (m) 8,74 Heads 4+2 Draft (m) 1,48 Showers+2 Displac...
CNB Lagoon 52 S for sale in France for €900,000 (£810,541)

CNB Lagoon 52 S for sale, France

Length: 16 m
Year: 2018
£810,541
​The owner's hull is superb, with large bathroom forward, separate toilet and double washhand, th...
Goetz Custom Yachts Custom 68 Sloop for sale in  for $995,000 (£758,211)

GOETZ CUSTOM YACHTS Custom 68 Sloop for sale,

Length: 21 m
Year: 1993
£758,211
A UNIQUE LIVABOARD CRUISING SAILBOAT DESIGNED TO BE SAILED AND MAINTAINED BY A COUPLE WITHOUT NEE...
Discovery Yachts Discovery 67 for sale in United Kingdom for £995,000

DISCOVERY YACHTS Discovery 67 for sale, United Kingdom

Length: 20 m
Year: 2009
£995,000
The stunning lines of this iconic Discovery 67 are a reflection of her pedigree design by Ron Hol...
Privilege Marine PRIVILEGE SERIE 5 for sale in Greece for €980,000 (£882,589)

PRIVILEGE MARINE PRIVILEGE SERIE 5 for sale, Greece

Length: 15 m
Year: 2017
£882,589
In refined cherry wood, her galley-up open to the saloon is ideal for private use with a reduced ...
Beneteau Oceanis Yacht 62 for sale in Malta for €1,000,000 (£900,601)

BENETEAU Oceanis Yacht 62 for sale, Malta

Length: 19 m
Year: 2019
£900,601
A brand new Beneteau Oceanis Yacht 62 is currently in Malta. She's a 2019 model with just 100 hou...
Excess 15 for sale in France for €936,000 (£842,962)

EXCESS 15 for sale, France

Length: 15 m
Year: 2019
£842,962Tax paid
EXCESS 15 the boat of the boat shows and training is to sale ! Come to dicovery, it's a boat full...
Franchini 63 L for sale in Italy for €1,000,000 (£900,601)

FRANCHINI 63 L for sale, Italy

Length: 20 m
Year: 2009
£900,601Tax paid
Beautiful Franchini 63 L maintained excellently by the owner, with teak blanket and aft garage th...
Nautitech OCEAN VOYAGER 82 for sale in Malta for €950,000 (£855,571)

NAUTITECH OCEAN VOYAGER 82 for sale, Malta

Length: 25 m
Year: 2003
£855,571
Great day charter catamaran, located in MaltaMaximum capacity 124 personsCurrently registered for...
Lagoon 560 for sale in Martinique for €1,190,000 (£1,071,715)

LAGOON 560 for sale, Martinique

Length: 17 m
Year: 2016
£1,071,715Tax paid
LAGOON catamaran 560 S2 version Private's owner's 4 cab layout + crew . Boat is in Tip Top condit...
Hanse 675 for sale in Malta for €1,220,900 (£1,099,543)

HANSE 675 for sale, Malta

Length: 21 m
Year: 2020
£1,099,543
The new Hanse 675 is the world's nicest 67 footer! Designed by Judel/Vrolijk and featuring the l...
Hanse 675 for sale in Turkey for €880,000 (£792,529)

HANSE 675 for sale, Turkey

Length: 21 m
Year: 2016
£792,529
Rare opportunity to own a pristine example of the Flagship within the Hanse range, the 675. This...
Jeanneau JY 64 for sale in Malta for €895,000 (£806,038)

JEANNEAU JY 64 for sale, Malta

Length: 20 m
Year: 2015
£806,038Tax paid
The Jeanneau 64 features elegant lines with classic proportions. Contemporary deck styling gives...
Leopard 58 for sale in Malta for €1,195,000 (£1,076,218)

LEOPARD 58 for sale, Malta

Length: 18 m
Year: 2016
£1,076,218Tax paid
Leopard Catamarans' flagship, Leopard 58, is expertly crafted by world renowned Robertson and Ca...
Grand Soleil 58 for sale in Malta for €950,000 (£855,571)

GRAND SOLEIL 58 for sale, Malta

Length: 18 m
Year: 2016
£855,571Tax paid
We are proud to present this opportunity to own the Grand Soleil 58, the flagship within the per...
Fountaine Pajot Galathea 65 for sale in Spain for €1,050,000 (£945,631)

FOUNTAINE PAJOT Galathea 65 for sale, Spain

Length: 20 m
Year: 2012
£945,631
Very nice sailing catamaran FOUNTAINE PAJOT GALATHEA 65 with huges volumes and space.Contact : Ph...
BELIZE 54 Daybridge for sale in United States of America for $1,450,000 (£1,104,930)

BELIZE 54 Daybridge for sale, United States of America

Length: 17 m
Year: 2017
£1,104,930
2017 Riviera Belize 54 Daybridge For sale.This 2017 Belize 54DB is in like-new condition. It is a...
Lagoon 620 for sale in Italy for €1,250,000 (£1,125,751)

LAGOON 620 for sale, Italy

Length: 19 m
Year: 2014
£1,125,751Tax paid
Balk Shipyard 38 M for sale in Russia for €1,200,000 (£1,080,721)

BALK SHIPYARD 38 M for sale, Russia

Length: 38 m
Year: 2010
£1,080,721
An excellent passenger sailing vessel of 2010 in excellent condition, suitable for private or com...
Beneteau Oceanis Yacht 62 for sale in Mexico for $1,275,000 (£971,577)

BENETEAU Oceanis Yacht 62 for sale, Mexico

Length: 19 m
Year: 2019
£971,577
Hardtop / Generator / Water maker / Air con Williams Turbojet TenderWith an 18 month waiting list...
Jeanneau JY 64 for sale in United Kingdom for £1,115,000

JEANNEAU JY 64 for sale, United Kingdom

Length: 20 m
Year: 2020
£1,115,000Tax paid
The Jeanneau 64 is a stunning blue water cruising yacht, built to a luxurious standard with a fab...
Leopard 58 for sale in United States of America for $1,390,000 (£1,059,209)

LEOPARD 58 for sale, United States of America

Length: 18 m
Year: 2019
£1,059,209Tax paid
Don't let new boat pricing fool you.  This lightly used 58 has been upgraded with everything you ...
Leopard 58 for sale in United States of America for $1,299,000 (£989,865)

LEOPARD 58 for sale, United States of America

Length: 18 m
Year: 2019
£989,865Tax paid
Change of plans, available now: 2019 Leopard 58 Coming back to market with a price drop!  Bring o...