Search Similar
  1. Home

Beneteau 40' for sale in Marina Del Rey, CA United States of America

$95,000

OFFERED BY

Denison Yacht Sales

LOCATION

Marina Del Rey, CA United States of America

YEAR

1995

LENGTH

39.99 ft.

DETAILS

Condition

Used

Year

1995

Make & Model

Beneteau 40'

Boat type

Power

Length

39.99 ft.

Location

Marina Del Rey, CA United States of America

Tax status

Ex VAT

MEASUREMENTS

Beam

12.01 ft.

Cabins

2

Draft

4.99 ft.

DESCRIPTION

Dancing Spell Boat | 40' Beneteau 1995

After 25 years of owning Dancing Spell the owners have decided to hang up the sailing gear and move on to the next adventures in Life.

  • Extensive Service Records
  • Dodger, Bimini, Connector Replaced 2019
  • Full Cockpit Enclosure with Mesh Panels
  • AGM Batteries 2 x 4D and G31
  • New Standing Rigging 2020
  • New Main 2020

Dancing Spell Boat | 40' Beneteau 1995

After 25 years of owning Dancing Spell the owners have decided to hang up the sailing gear and move on to the next adventures in Life.

  • Extensive Service Records
  • Dodger, Bimini, Connector Replaced 2019
  • Full Cockpit Enclosure with Mesh Panels
  • AGM Batteries 2 x 4D and G31
  • New Standing Rigging 2020
  • New Main 2020
  • Cruising Flasher with Sock
  • Solar Panels (flexible panels)
  • New Water Heater 2021
  • New Bottom Paint 2023
  • New Shaft Seal 2023
  • 10' Achiles Inflatable (high pressure floor)
  • 6hp Mercury Outboard
  • LED Lighting
  • Custom Salon Table
  • Feathering Propeller

Dancing Spell HIGHLIGHTS

  • Yacht Details: 40' Beneteau 1995
  • Location: Marina Del Rey, CA
  • Engines: Yanmar
  • Last Updated: Apr 4, 2024
  • Asking Price: $95,000
  • Max Draft: 5' 5''

Engine

  • Yanmar 56hp
  • Complete Records
  • 3090 hours
  • High Output Alternator 150amp
  • Inverter DC/AC
  • 41 gallon fuel tank
  • AGM Group 31 2020
  • Lots of spare parts. ex alternator, fuel pump, raw water pump, etc
  • Manuals

Interior

  • Custom Salon Table
  • LED Lighting
  • Lots opening ports
  • 3 burner propane 3 burner w oven
  • Double SS sinks
  • Hot & cold running water
  • Wine locker
  • 12 volt refrigerator and freezer front and top loading
  • Large cold plate in freezer section
  • Roll out storage compartment
  • Chart Table
  • Raymarine Repeater at Chart Table
  • 12vdc control panel
  • Aft Head
  • Forward head
  • Each with vanity
  • Aft cabin double berth

Sails & Rigging

  • New Stranding Rigging 2020
  • New Furling Main 2020
  • 120% Furling Genoa

Deck

  • Anodized aluminum stem-head fitting with 2 rollers, one tilting
  • Anodized aluminum toe rails
  • 4 anodized aluminum mooring cleats
  • 4 roller fairleads, aft and amidships
  • Aft anchor roller to port
  • SS bow pulpit with red-green navigation light
  • SS two part stern pulpit with removable lifeline, horseshoe buoy support and flagstaff holder
  • 24" stainless steel stanchions
  • Double SS lifelines with gates port and starboard
  • Self draining anchor locker with anchor rode eye strap
  • Manual windlass recessed in anchor locker
  • 2 handrails on coach roof Halyards and maneuvering lines led aft to cockpit under a deck cowling
  • 7 spinlock stoppers for halyards and maneuvering lines
  • 4 x 6", aluminum anodized cleats
  • 2 x 30 CST winches
  • 2 x 48 CST genoa sheet winches
  • Mainsheet traveler on coach roof with adjusting lines
  • Coach house mounted genoa tracks with cars
  • 2 genoa sheet turning blocks on coach house
  • 2 sail and life-raft storage lockers in cockpit
  • Lazarette locker with access to steering quadrant
  • Teak slats on cockpit seating
  • Aft swim platform access door in transom
  • SS swim ladder with teak steps and hand hold
  • 2 equipment lockers in swim platform
  • Stern light on transom
  • Transom fender
  • Cockpit table
  • Steering pedestal with: 2 folding leaves, table light insulated icebox with drain, hand hold, leather covered wheel, glass holder on pedestal, compass, engine instrument panel, single lever engine control panel for electronics
  • Stern pulpit seat

Manufacture Description

This second generation Oceanis is designed to provide her owners with plenty of cruising performance and comfort, blended with safety and true ease of handling. Her fin keel with bulb has a low center of gravity which allows her to sail efficiently on all points of sail while providing excellent stability. The large diameter, leather sheathed wheel, coupled to a counter-balanced rudder, provides precise and easy steerage under sail or when maneuvering under power in tight quarters. Application of Beneteau's patented Watershield System in the hull laminate provides protection against osmotic blistering. And by using a structural grid system in the hull, stiffness is ensured as well as correct rig and keel load distribution. In the interior, open spaces, fixed hull ports and skylights, many opening ports and hatches, provide an abundance of light and air. The galley is close at hand both to the cockpit and the salon so the chef is never far from the rest of the crew. The Oceanis 400 cockpit is a mastery of ergonomic design, giving plenty of elbow room to the largest of crews, whether underway or socializing around the cockpit table at the end of the day. High coamings provide plenty of back support and security for the crew. Genoa tracks and turning blocks are placed on the cabin top as is the mainsheet traveller. This positioning improves the sheeting angle of the genoa and enhances upwind performance. It also clears the side decks making them safer to use. The double spreader, furling mast has discontinuous rigging and forward lower shrouds. The furling mainsail is controlled by an inhaul and an outhaul line led aft to the maneuvering winch. All lines running aft from the mast to the cockpit are covered by a deck cowling. Genoa sheets and maneuvering lines are controlled by large self-tailing winches, and are used standing rather than sitting, making it easier for the crew. Rope tails are stored using tiebacks affixed to the coachroof. Lifeline gates are at maximum beam where they are most accessible. The anchor locker contains the standard electric anchor windlass and the below deck furling drum. The stemhead has two anchor rollers, one of which tilts and is balanced forward to allow easier lowering of the anchor.


PROPULSION

Engine Tankage

40.0

ADDITIONAL INFORMATION

HULL

Hull Material

Fiberglass

ACCOMMODATION

Toilet

2

ABOUT BENETEAU 40'

The Beneteau 40' is 40 feet long that boasts a 12 feet beam. The Beneteau 40' is made of fiberglass.

SIMILAR BOATS FOR SALE

boat-cover

41.01 ft.

|

1996

Westbrook, Connecticut

Brewer Yacht Sales

boat-cover

39.99 ft.

|

2017

Surfside, FL

Denison Yacht Sales

boat-cover

39.99 ft.

|

2018

Miami FL

Denison Yacht Sales

boat-cover

39.99 ft.

|

2019

Miami,

FYI Yachts

boat-cover

39.99 ft.

|

2019

Dania Beach, FL

Denison Yacht Sales

boat-cover

41.01 ft.

|

2020

Marina Del Rey, California

Seattle Yachts

View more similar boats Arrow