LENGTH:
33.01 ft.
|
YEAR:
2001
LOCATION:
Warwick, Rhode Island
OFFERED BY:
Brewer Yacht Sales
LENGTH:
24.18 ft.
|
YEAR:
2004
LOCATION:
Warwick, Rhode Island
OFFERED BY:
Brewer Yacht Sales
$35,000
LENGTH:
41.83 ft.
|
YEAR:
1989
LOCATION:
Rehoboth, Massachusetts
OFFERED BY:
Brewer Yacht Sales
$19,950
LENGTH:
29.92 ft.
|
YEAR:
1987
LOCATION:
Warwick, Rhode Island
OFFERED BY:
Brewer Yacht Sales
$12,750
LENGTH:
27.99 ft.
|
YEAR:
1986
LOCATION:
Pawcatuck, Connecticut
OFFERED BY:
POP Sells
$148,500
LENGTH:
32.25 ft.
|
YEAR:
2013
LOCATION:
Warwick, Rhode Island
OFFERED BY:
Brewer Yacht Sales
LENGTH:
41.99 ft.
|
YEAR:
1985
LOCATION:
Greenport, New York
OFFERED BY:
Brewer Yacht Sales
$27,800
LENGTH:
31.99 ft.
|
YEAR:
1984
LOCATION:
Alameda, California
OFFERED BY:
POP Sells
Boat not available.
LOCATION
Honolulu, HI United States of America
YEAR
1999
LENGTH
35.01 ft.
Condition
Used
Name
Hence
Year
1999
Make & Model
Brewer Aluminum
Boat type
Sail
Length
35.01 ft.
Fuel Type
Diesel
Location
Honolulu, HI United States of America
Beam
11.25 ft.
Cabins
3
Draft
5.25 ft.
Fresh Water Tanks
2 Aluminum (25 Gallons)
LWL
28.74 ft.
Ted Brewer designed 35' Aluminum Cruising Boat.
Where in the World do You want to Go?
World Class Sailing Yacht Built To Exacting Standards By World Class Boat Builder Sailtech Inc, an established aluminum boat building company located in Vancouver, B.C. Canada.
Ted Brewer designed 35' Aluminum Cruising Boat.
Where in the World do You want to Go?
World Class Sailing Yacht Built To Exacting Standards By World Class Boat Builder Sailtech Inc, an established aluminum boat building company located in Vancouver, B.C. Canada.
The owners choose the builder because of the level of quality in metal bending and welding used in the aluminum commercial boat industry.
Interior design was a combination of very experienced owners and Ted Brewer.
The yacht is built with 5000 series aluminum, topsides are unpainted. Bottom is epoxy with TBT antifouling. Above decks are painted with Interlux LPU.
Interior is Canadian Maple and Teak finished with varnish.
This Yacht was designed and built for two people for extended ocean cruising, which they did for many years. They are going "land based” which has made this Yacht available to new owners.
A custom aluminum sloop designed by naval architect Ted Brewer. Built by SailTec Inc. in Vancouver, Canada in 1999/2000.
The sloop HENCE was designed as an ocean cruiser. She has proven herself to be safe, comfortable and seaworthy. She is a modern designed (NASA) swept fin keel, raked bow with rounded (radius) chines. The rudder is connected to a heavily reinforced skeg and rudder post.
Her cockpit is large and comfortable with full cushions and anchors for jacklines. It is protected by a handsome aluminum and glass dodger with a sailing bimini to protect from sun and rain. The cockpit has a teak foldout table and a binocular tray.
The saloon is finished with a maple sole and bulkheads outlined by teak trim. A large maple table with two leaves and deep fiddles doubles as an eating and social gathering place below.
Thick comfortable cushions are throughout the boat. The galley has a deep double sink with running hot and cold water. HENCE is outfitted with a 16 gal per hour water maker. A two burner gimbled stove has a harness and guardrail. There is a full size 12v reefer and freezer accessible from the galley.
On the port side down below is a navigator’s table with access to electrical panels, radios and a sat phone antennae for use below. The radar screen can be adjusted to be seen by the navigator from the chart table.
The head is compact with a bronze toilet and stainless steel lavatory. In heavy seas there are plenty of areas to brace. The wet locker drains into the shower drain.
There is a double aft berth and a single forward. They are fitted with lee clothes and have personal storage in each. There is a USB charging station in the forward stateroom.
The sloop HENCE is a well-founded craft and is very comfortable both at sea and at anchor.
Forward Cabin Closet Top Starboard
V-Birth Closet Top Port
V-Birth Closet Middle Starboard: Radio/Comm items
V-Birth Closet Middle Port: Electrical
V-Birth Closet Bottom Starboard
V-Birth Closet Bottom Port
V-Birth Closet Floor
V-Birth Center Settee Under cushion started in 09/20
V-Birth Storage
Port side top shelf Fore
Port side top shelf middle
Port side top shelf aft
Port side bottom shelf fore
Port Side bottom middle shelf
Port Side Bottom Shelf aft
Settee Locker under cushions Port side
Port Settee Middle Behind cushion
Port side under cushion
SB settee behind cushion center
Port Settee behind cushion fore
Aft cabins under cushion: Pur 35 Handheld watermaker
Aft cabin locker
Head wet locker
Lav Cabinet
Chart Table
Cockpit Locker * Outboard motor * Fire axe * Dock lines, storm lines, small ties and lines * Spare prop * Fortress storm anchor, small bruce anchor * Bosun’s chairs - 2 * Boat hooks - 2 * Rigging cutters, large gaff and hand gaff, chaff guard fire hose * Misc. tarps and hoses
Cruising Speed
6 knots @ 2600 RPM
Engine Count
1
Engine Horse Power
38 HP
Engine Hours
2000
Engine Location
Center
Max Speed Knots
7 knots
HULL
Ballast
5400 lbs
Designer
Ted Brewer
Hull Material
Aluminum
Hull Shape
Monohull
OTHER
Double Berths
1
Single Berths
2
Bridge Clearance
51 ft 0 in
Builder
Sail Tech Inc
Country Built
United States
Displacement(kgs)
16000 lbs Dry Load
Electrical Circuit
12V
Engine Year
2000
Engine Type
Inboard
Fuel Tanks
2 Aluminum (35 Gallons)
Head Room
6 ft 2 in
No of Heads
1
Keel
Fin
Propeller
3 blade propeller
The Brewer Aluminum is 35 feet long that boasts a 11 feet beam. This 1999 diesel Brewer Aluminum powered by Yanmar 3JH2E with 38 HP horsepower is capable of reaching a maximum speed of 7 knots knots and a cruising speed of 6 knots @ 2600 RPM. The Brewer Aluminum is made of aluminum.
