OFFERED BY
Euroyachts (Largs)
LOCATION
North Ayrshire United Kingdom
YEAR
1985
LENGTH
18.01 ft.
Condition
Used
Name
Martinet
Year
1985
Make & Model
Swift 18
Boat type
Sail
Length
18.01 ft.
Fuel Type
Petrol
Location
North Ayrshire United Kingdom
Tax status
Tax Paid
Beam
7.91 ft.
Draft Max
5.58 ft.
Draft Min
0.72 ft.
Cabins
1
Berths
4
This Swift 18 is berthed in Largs Yacht Haven, berth available for new owner.
Lifting keel fully working 4 berth, Honda 4 hp outboard, Main sail, Furling Jib, Porta potti 12v leisure battery, cabin lights, some instruments. All cabin cushions, very dry cabin, wash boards, 4 fenders Stirrup pump, Meth Camping stove. Various lines, warps, sheets, ropes. Easily sailed single handed Check out the Swift 18
Swift 18
Ex marine, airline pilot and single-handed transatlantic sailer John Charnley teamed up with designer Colin Silvester. What emerged was the Swift 18, which conformed to the French Micro Cup rules. The rules dictated design characteristics, built in buoyancy, retractable keel etc. With hull and deck made of 1/2inch balsa sandwich, 8oz woven rovings and 1 1/2 oz chopped strand mat, this made a strong boat.
The Swift 18 is light with a high aspect rig which makes her more of a racer. She was tested in a force 7 Northerly, with two reefs and she stayed light on the helm and was well balanced. The Swift has a roomy well laid out accommodation. A large double forepeak berth, and a central galley, comprising 2 ring cooker and bowl/sink. There are 2 full length settee berths aft with storage under the settee berths are 1ft 8ins wide and the forepeak berth from 5ft 6ins to nothing over a length of 6ft 6ins. there is an infill here and underneath a chemical toilet.
There is sitting head room in saloon area. She has a kick up rudder which makes it safer than a slide up type. It is controlled by a screw jack (45 turns up and 45 turns down). She also has a transom well for an inboard/outboard. This making it better protected in heavy weather. She has sturdy cleats and a large anchor well. Her self draining cockpit easily seats four people.
Specification
LOA Length 18 ft 0 in (5.49 m) Length waterline 16 ft 4 in (5 m) Beam Width 7 ft 11 in (2.41 m) Draft Keel down 3 ft 6 in (1.07 m) Draft Keel up 0 ft 9 in (0.22 m) Displacement 1520 lb (690 kg) Ballast 375 lb (170 kg)
Rigging Fractional sloop
SailsMain 94 ft² (8.7 m²) Working Jib 60 ft² (5.6 m²) Genoa 105 ft² (9.8 m²) Storm Jib 25 ft² (2.3 m²) Total sail area 199 ft² (18.5 m²) Spinnaker 199 ft² (18.5 m²)
New Cockpit spray hood 2023
Honda 4hp outboard
Includes a Yard trailer (not road legal)
History
The Swift 18 was unveiled at the 1981 Southampton Boat show. It was originally intended to be made from aluminium but went into production in GRP. The boat was designed to comply with the French micro cupper rules with a maximum sail area of 199 ft2.
However it is not an all out racing boat and is rather a comfortable trailer sailor, capable of coastal cruising for small families. The boat is virtually unsinkable with foam buoyancy built in. It was met with enthusiastic reviews from the press and went on to sell someboats.
The original manufacturer, JCA, built about 220 boats from 1982 to 1985. The company changed name to Swiftcraft and relocated to Shamrock Quay in Southampton during this period.
In 1985 the business was sold and ended up in the hands of Honnor Marine at Totnes Devon. They built a modified boat, marketed as the 300 series. These featured a number of modifications from the original boats, reputedly for cost reduction reasons. Notably these changes include different toerails and non-tapered masts. Honnor Marine built about 35 to 40 boats.
Then around 1988 Marlin International bought the rights, moulds and materials from Honnor Marine. Some of the cost reductions that Honnor Marine had made were reversed and the new boats were marketed as the 400 series, with manufacturing returning to Southampton. Only about 10 of the 400 series boats were built before production ceased in around 1990.
Euroyachts disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Engine Count
1
Engine Horse Power
4
Genoa
Yes
Mainsail
Yes
HULL
Hull Material
Grp
Hull Color
White
Designer
Silvestor / Charnley
Hull Construction
GRP
Super Structure Colour
White
Deck Colour
White
Hull Type
Mono
NAVIGATION EQUIPMENT
Navigation Lights
Yes
ELECTRICAL EQUIPMENT
Battery
Yes
Bilge Pump
Yes
GENERAL EQUIPMENT
Spray Hood
Yes
Fenders
Yes
OTHER
Keel Type
Lifting Keel
Genoa
Yes
Mainsail
Yes
The Swift 18 is 18 feet long that boasts a 7.9 feet beam and a draft of 1.7. This 1985 Petrol Swift 18 powered by Honda 4 with 4 horsepower. The Swift 18 is made of grp. This vessel comes equipped with battery, bilge pump, spray hood, fenders as well as being equipped with navigation lights.
LENGTH:
18.01 ft.
|
YEAR:
1983
LOCATION:
Stuart, Florida
OFFERED BY:
Majesty Yachts USA
$1,100,000
LENGTH:
70.01 ft.
|
YEAR:
2002
LOCATION:
Miami, Florida
OFFERED BY:
United Yacht Sales
LENGTH:
41.99 ft.
|
YEAR:
2004
LOCATION:
Daytona Beach, Florida
OFFERED BY:
Frank Gordon Yacht Sales
$5,900,000
LENGTH:
114.99 ft.
|
YEAR:
2005
LOCATION:
Fort Lauderdale, FL
OFFERED BY:
Denison Yacht Sales
$25,000
LENGTH:
18.01 ft.
|
YEAR:
2017
LOCATION:
St James City, Florida
OFFERED BY:
POP Sells
LENGTH:
44.0 ft.
|
YEAR:
2018
LOCATION:
Palm Beach, FL,
OFFERED BY:
Waterfront Yacht Brokerage