$795,000
OFFERED BY
Northrop and Johnson
LOCATION
Phuket, Thailand
YEAR
1988
LENGTH
86.06 ft.
Condition
Used
Name
ASPIRATION
Year
1988
Make & Model
Nautor Swan 86
Boat type
Sail
Length
86.06 ft.
Fuel Type
Diesel
Location
Phuket, Thailand
Tax status
Tax Not Paid
Beam
20.24 ft.
Cabins
3
Draft
11.42 ft.
LWL
66.99 ft.
The hull and deck are GRP sandwich construction and foam core (hand laid E-glass & Aramid fibre sandwich with foam core).
Structural bulkheads are foam cored and laminated to hull and deck.
Teak laid deck, replaced in 2005/6
Aspiration has the optional “wing keel” – the ballast keel is a lead casting with antimony.
Cast in keel bolts are of stainless steel.
Rudder of foam filled GRP with high tensile stainless steel stock. Rudder dropped and new bearings installed 2014
Cable steering gear. Recessed destroyer type single wheel with elk-hide cover.
There are two watertight bulkheads - anchor locker & lazarette.
Deck hatches removed, disassembled and repaired where necessary 2015/16. Acrylic replaced on most.
Main salon fixed acrylic windows removed and replaced with tempered glass 2015/16. Teak wood on interior of windows replaced.
Deck Hardware & Ground Tackle
Anchor system Retractable anchor arm with recessed anchor windlass
Anchor 63 kg CQR anchor with 110m of 15mm chain
Windlass Lewmar 4000 horizontal windlass in foredeck locker
Deck Lockers 8 x deck stowage lockers in cockpit
Deck Teak laid deck
Winches
15 Lewmar winches in total with six a function Lewmar Commander 6 hydraulic unit, serviced 2018
2 x Lewmar 110 linked with pedestals secondary are hydraulic drive;
2 x Lewmar 110 linked with pedestals secondary are electric drive
2 x auxiliary winches Lewmar 65 CST;
Mainsheet winch 90 SST with electro hydraulic drive and drop-in pedestal;
All winches serviced 2020.
Various
Sun bimini, new Oct 2018.
Sprayhood. Deck cushions.
Chain and anchor, re-galvanised 2015
1 x Yanmar 6LYA, 365 Hp or 272Kw, 4 stroke, diesel, 6 cylinders in line, Turbo Aspirated, sea water indirect cooled, marine engine - New 2014.
Stainless steel Aqualoy 22 propeller shaft including new cutlass bearings - New 2018.
MaxProp feathering propeller.
Running Hours: 1255 Nov. 2023
Drive: PRM 1000 Ratio 2.983:1
Controls: Mechanical / cables, dual instrument panels at helm & navigation station
Fuel tanks drained and cleaned all existing fuel polished 2018.
New exhaust hose Dec 2018
Generator: Kohler 20E OZD 22.5 KVA, diesel generator is installed. 10.845 hrs Nov. 2023
Air Conditioning: Five (5) reverse-cycle units 220v AC, new Feb 2016. Serviced Nov 2019. Water pump serviced Feb 2020
Water-maker: Spectra MPC-3000 water maker (new 2014)
Three (3) Dometic / Sealand Vacuflush toilets
One (1) Manual Par Jabsco toilet in cabin’s head
Holding tanks for Vacuflush toilets with diverter valves
Emergency engine-driven high-capacity bilge pump installed
Four (4) Par Jabscohigh capacity bilge pumps with auto float switches. All serviced Mar 2020
Gianneschi 24VDC high output water pressure pump
Whale Gusher 10 and Whale Gusher 30, manual bilge pumps.
Ship power is 24 V DC.
Deep cycle house batteries 640AH new Nov 2019
Separate battery bank is supplied for Navigation and Radio equipment.
Separate 12V battery bank is supplied for main engine and generator starting.
Shore power, is hard wired aft with heavy duty shore power cable. Inside boat replaced 2019
Two (2) Victron Multiplus 24 VDC/70 Amp automatic battery chargers/inverters.
One (1) Mastervolt Mass 24 VDC/50 Amp battery charger.
Main engine is supplied with 2 alternators, one of which is high capacity 24V 175 Amp for house battery charging.
Indirect lighting replaced with over 20 high quality dimmable LED lumitec rail light fixtures throughout.
Autopilot: Evolution 400 with P70 display, (new Nov 2016), interfacing with Raymarine hybrid touch chart plotter at helm 2020. Hydraulic hoses replaced Nov 2018, hydraulic ram serviced Dec 2018. Hydraulic pump serviced Sep 2019
A75 Multifunction display below decks, new Nov 2016
Wind displays: New Nov 2016 – incorporating a I60 wind display unit; a I70 multifunction display for depth etc.; plus a close hauled wind display.
GPS: Raymarine
Radar: Furuno 64 nm radar
Chart Plotter: Raymarine hybrid touch E70023 chart plotter mounted at helm 2020
Magnetic compass: Suunto D-165
Gyro Compass:1
Communication
VHF: Icom VHF IC-M502– 2003 dual station
SSB: Skanti 400w HF radio
Computer: Onboard PC computer system interfaced with CCTV
ASPIRATION has a classic style interior finished in teak with satin finish. The interior was hand built with custom care by Nautor’s craftsmen using the best yacht practice and first grade materials.
Description:
Aft helm / working cockpit.
Large centre cockpit with dining table suitable for outdoor informal dining.
Access to the lower deck is by two companionways.
The first one aft from the aft cockpit serves the owner’s cabin – from where you can also go forward to the navigation station situated just forward of the cabin.
The main entrance leads from the main central cockpit and leads into the main saloon.
Main saloon 1 x Samsung 46” flat screen on articulated wall mount
Master cabin 1 x Panasonic 22” flat screen
Sound system Bose 5.1 entertainment system with speakers throughout the interior/exterior
Middle cockpit Equipped with 24-VDC refrigeration unit
Computer Ship’s computer in navigation station
Rig was unstepped and underwent a complete inspection and refit in 2014. The rod rigging underwent die penetrant test of all the heads and terminations. Diagonal shroud N4 were replaced as well as some of the toggles aloft and deck toggles of the vertical and diagonal shrouds N1. The secondary stays and the backstay runners in Aramid fibres were replaced)
Mast Carbon fibre mast & boom by Hood Yacht Spars
Mast height 105 feet – 32.24 meters
Hydraulic furler Reckmann. Serviced Sep 2018
Spinnaker poles 2 x Carbospars
Reaching struts 2 x Carbospars
Standing rigging s/s rod
Inner forestay Kevlar
Baby-stay Kevlar
Backstay Kevlar
Running rigging Yacht Braid
Backstay & Vang fitted with Navtec hydraulic adjuster. All hydraulic cylinders serviced 2019/2020
New foresheets 2015
Reckmann foresail hydraulic reefing system serviced by Reckmann in Germany 2014
New mainsail cover including a “lazy-bag” system for easier stowage of the main, January 2019.
SAILS:
Mainsail North Sails full battened Norlam Dyneema/Carbon SRPC. New 2014.
Genoa Cruising Rolly Tasker Genoa – 202 m2 Tri-radial cut. New January 2016.
Staysail Spectra.
Headsail Challenge Performance Cruising warp drive tri-radial cut with 2 ply leach and UV cover protection. New 2014.
Tender
Bombard EXPL-SB500 5-meter Hypalon RIB with centre console (serviced 2015)
Tender motor - 60 HP 4-stroke Yamaha outboard (new 2014) Serviced 2019, all electric cables replaced Oct 2019; new controller 2020
New canvas covers for dinghy, January 2019.
Safety Equipment
Life rafts Two (2) Ocean Safety 6-man
Life rings One (1) w/MOM overboard
Life jackets 12 Ocean Safety MCA inflatable life jackets
EPIRB GME 406 MHz Category I
AIS Ray Marine transponder integrated with chart plotter
RECENT MAJOR IMPROVEMENTS INCLUDE:
Sept - Oct 2018 – New prop shaft, cutlass bearings and thru hulls. General service and antifouling plus some new canvas.
Nov 2016 – new Raymarine instrumentation including A75 multi-function display for nav station below decks, Evolution 400 autopilot with P70 display, wind displays and multi-function display.
Five new air conditioning units, January 2016, Siam Cooling Systems “Yen Dee” package.
Yanmar 6LYA, 365 Hp or 272Kw, diesel engine, 6 cylinders in line, Turbo Aspirated, new 2014.
Stainless steel Aqualoy 22 propeller shaft new 2018. Including cutlass bearings, refurbished Max Prop, etc.
Rig was unstepped and has undergone to a complete inspection and refit in 2014. The rod rigging has undergone to die penetrant test of all the heads and terminations. Diagonals shroud N4 were replaced as well as some of the toggles aloft and deck toggles of the vertical and diagonal shrouds N1. The secondary stays and the backstay runners in Aramid fibres have been replaced.
Reckmann foresail hydraulic reefing system serviced by the Reckmann in Germany 2014.
Rudder dropped, and new bearings installed 2014
Fo’c’sle fitted originally fitted with a V berth now fitted as working area, with an Electrolux EWW1273 washing machine and fitted spares storage
Ice maker installed in galley 2014. Serviced 2019
New Hafele washing machine 2019 fitted in galley.
Refrigerator and freezer doors removed and repaired including new hardware, new gel coat on the interior surfaces and new teak veneer on exterior faces.
New Spectra MPC-3000 water maker installed 2014.
New Yamaha 60 hp 4-stroke dinghy outboard motor 2014. Serviced 2020
Ray marine chart plotter hybrid touch with radar interface at helm in aft cockpit new 2020 (interfaces with 2016 new instrumentation)
Recent works in August-September 2017
Removal and of Goiot ports for re-anodizing, replacing of the rubber seals etc.
Removal of helm and replacement of roller bearings.
Removal and anodizing of helm wheel shroud, including various inspection plates and aluminium items.
Removal and repair, including anodizing, many running rigging blocks and various deck hardware.
Removal of most of interior chrome hardware for re-chroming – door handles, etc.
Removal and service of Goiot hatches.
Disassemble and service winches, including re-chrome various parts.
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Cruising Speed
8 Knots
Engine Count
2
Engine Horse Power
380.00
Engine Hours
1255.00
Engine Location
Middle
Max Speed Knots
10
HULL
Hull Material
fiberglass
ELECTRICAL EQUIPMENT
Air Conditioning
Yes
ACCOMMODATION
Crew Berths
4
Crew Cabins
2
OTHER
Double Berths
2
Single Berths
0
Country Built
Malaysia
Displacement(kgs)
55000
Engine Hours2
10845.00
Engine Year
2014
Engine Type
Inboard
Fuel Capacity Gal
528
Fuel Tanks Capacity
2000 liters
Gross Tonnage
78
No of Heads
0
Holding Tank Gal
528
Num Sleeps
6
Water Capacity Gal
528
Water Tanks Capacity
2000 liters
Twin Berths
1
Displacement Type
tonnes
Holding Tanks Capacity
0 liters
The Nautor Swan 86 is 86 feet long and has a 20 feet beam and can hold up to 528 gallons of fuel and 528 gallons of water. This 1988 diesel Nautor Swan 86 powered by Yanmar 6LYA with 380.00 horsepower is capable of reaching a maximum speed of 10 knots and a cruising speed of 8 Knots. The Nautor Swan 86 is made of fiberglass, has 4 beds in 2 cabins . This vessel comes equipped with air conditioning .
$3,293,224
LENGTH:
82.35 ft.
|
YEAR:
2012
LOCATION:
, Florida
OFFERED BY:
Northrop and Johnson
$2,495,000
LENGTH:
82.02 ft.
|
YEAR:
2005
LOCATION:
Newport, Rhode Island
OFFERED BY:
Northrop and Johnson
$3,940,000
LENGTH:
85.99 ft.
|
YEAR:
2018
LOCATION:
Fort Lauderdale, Florida
OFFERED BY:
Luke Brown Yachts
LENGTH:
85.99 ft.
|
YEAR:
2023
LOCATION:
Redmond, Washington
OFFERED BY:
Pier One Yacht Sales
$4,899,000
LENGTH:
86.25 ft.
|
YEAR:
2018
LOCATION:
Miami, Florida
OFFERED BY:
Rick Obey Yacht Sales
$6,250,000
LENGTH:
85.99 ft.
|
YEAR:
2019
LOCATION:
Kings Point, Florida
OFFERED BY:
Rick Obey Yacht Sales