$1,195,000
LENGTH:
69.91 ft.
|
YEAR:
2008
LOCATION:
Stuart, Florida
OFFERED BY:
United Yacht Sales
LENGTH:
50.0 ft.
|
YEAR:
2009
LOCATION:
Stuart, Florida
OFFERED BY:
Majesty Yachts USA
$1,250,000
LENGTH:
64.99 ft.
|
YEAR:
2007
LOCATION:
Fort Lauderdale, FL
OFFERED BY:
Denison Yacht Sales
$1,124,000
LENGTH:
64.99 ft.
|
YEAR:
2006
LOCATION:
Fort Lauderdale, FL
OFFERED BY:
Denison Yacht Sales
$1,499,000
LENGTH:
64.99 ft.
|
YEAR:
2006
LOCATION:
Fort Pierce, Florida
OFFERED BY:
Rick Obey Yacht Sales
LENGTH:
50.98 ft.
|
YEAR:
2011
LOCATION:
Miami, Florida
OFFERED BY:
Allied Marine Brokerage and Charter
$675,000
LENGTH:
58.99 ft.
|
YEAR:
2005
LOCATION:
Marathon, Florida
OFFERED BY:
Rick Obey Yacht Sales
No image available
$715,000
LENGTH:
58.99 ft.
|
YEAR:
2005
LOCATION:
Huntington Beach CA
OFFERED BY:
Denison Yacht Sales
Boat not available.
LOCATION
Marina Del Rey, CA United States of America
YEAR
2008
LENGTH
51.51 ft.
Condition
Used
Name
Clarus II
Year
2008
Make & Model
Marquis 50 LS
Boat type
Power
Length
51.51 ft.
Fuel Type
Diesel
Location
Marina Del Rey, CA United States of America
Beam
14.99 ft.
Cabins
2
Draft
4.76 ft.
Fresh Water Tanks
(150 Gallons)
What's not to Love?
The 50LS built by Marquis/Carver Yachts in Pulaski, WI is an extremely well designed, comfortable and capable flybridge cruiser.
Clarus II would make a great local or long distance coastal cruiser for family outings or big parties. Get to Catalina in a jiffy with friends or cruise to Mexico and the San Juan Islands!
What's not to Love?
The 50LS built by Marquis/Carver Yachts in Pulaski, WI is an extremely well designed, comfortable and capable flybridge cruiser.
Clarus II would make a great local or long distance coastal cruiser for family outings or big parties. Get to Catalina in a jiffy with friends or cruise to Mexico and the San Juan Islands!
This great looking yacht sports a huge flybridge with sun pads forward of the helm, wet bar by the helm and seating and table for six aft.
Down the stairs to the cockpit, you'll find plenty of room for fishing or afternoon cocktails while the submerging swim step allows you to launch your dingy with a push of a button!
The interior is well thought out with a large salon with satellite entertainment followed by a galley with lots of fridge and freezer space and a very comfy dinette up forward. Down forward, are two
comfortable cabins (each with their own bathroom).
HULL TYPE:
Modified-V, planing, with flared bow, hard chines, Bow and Stern thrusters and Hydraulic swim platform.
MATERIAL:
Solid FRP (fiber reinforced plastic) bottom with cored hull sides.
EXTERIOR HULL:
White gelcoat with integral hullside windows port and starboard mid freeboard with black boot top.
BULKHEADS:
Reinforcement enhanced by bulkheads bonded to the hull with FRP (fiber reinforced plastic).
STRINGERS:
Main hull stiffness provided by FRP hollow longitudinal stringers. Complete inspection not possible
due to limited access. Appears serviceable where observed.
TRANSOM:
Reinforced, FRP with hydraulic swim platform.
BILGE:
A smooth white gelcoat surface
TYPE:
FRP construction cored with undetermined material, with white non-skid surface.
COCKPIT:
White non-skid molded FRP (Fiberglass Reinforced Plastic) with wrap around bench seating boarding
stairs to swim platform and fly bridge to starboard.
HULL-TO-DECK JOINT:
Deck overlap type (Shoebox) with fasteners.
STANCHIONS:
Welded stainless steel rail system, runs the forward 2/3rd perimeter of the vessel.
TOE RAILS:
Large molded FRP toe rails as part of deck layup.
SCUPPERS:
Cockpit has scuppers at port and starboard aft corners.
CHOCKS AND CLEATS:
Chocks and cleats appear to be stainless steel all sighted are thru-bolted
WINDLASS/GIPSY:
Maxwell 3500 Automatic two way windlass with foot and helm controls at both helms with Plough anchor and chain rode.
DECK SURFACE:
White gel coat with molded in non-skid.
HATCHES:
Single round hatch above vee berth. With retractable shade and screen.
GRAB RAIL:
Hand rails along sides of super structure and others at various locations on vessel.
MATERIAL:
FRP (fiber reinforced plastic) with Undetermined coring material.
WINDOWS/PORTS/DOORS:
Large windows on cabin house sides, large forward windshield, Entrance to the main salon is gained by a large sliding companionway door in the cockpit area.
CANVAS AND SUPPORT STRUCTURE:
Factory hardtop with modular clear plastic (Polycarbonate) windows and white canvas material.
MATERIAL:
FRP (fiber reinforced plastic) molded fly bridge.
TYPE:
Flying bridge provides helm station and crew seating area with framed clear plastic spray shield .
COCKPIT:
Aft deck cockpit provides covered protection and access to mains salon, swim platform and boarding
gates.
SEATS:
White vinyl cushioned bench seat with stowage beneath.
An open, galley up style floor plan.
CABIN BRIGHT WORK:
Gloss varnish finish.
STORAGE AREAS:
The cabinets, lockers, drawers, and shelving are well crafted and finely fit
HEADLINERS:
Headliner material throughout is a light colored vinyl.
DOORWAYS:
wood cabin and head doors throughout vessel.
HEADS:
Two Vacuflush heads, one with sperate shower and master with bathtub
FAUCET FIXTURES:
Faucet and fixtures in the galley and head are demand pump type.
LIGHT FIXTURES:
An adequate array of lighting throughout the vessel.
AIR CONDITIONING UNITS:
MarineAir units throughout with digital controls At Salon, Master stateroom, Vee berth and fly Bridge.
CABIN HEATING:
The units reverse cycle for heat.
GALLEY
LOCATION:
Starboard, Midship, galley up. With granite countertops.
SINKS:
Double Stainless sink with rounded corners. Oval sinks in the heads and fly bridge.
REFRIGERATION:
Two (2) below counter Vitfrigo refrigerator / freezers in the galley.
STOVE/OVEN:
Electric two (2) burner.
MICROWAVE:
Frigidaire Stainless turn table type.
ACCESSORIES:
Fisher / Paykel dishwasher.
OTHER:
Gaggenau Vario Grill at bridge.
Fly Bridge refrigerator and Ice maker
MANUFACTURER:
Volvo Penta D12 715 HP diesel engines
HORSE POWER:
715 horsepower per engine.
INDICATED HOURS:
Port hours 1349. Starboard hours 1370
THROTTLE CONTROLS:
Fly by wire Volvo Penta.
ENGINE MOUNTS AND BED:
Main engine beds are FRP longitudinal stringers inboard and outboard, adjustable motor mounts are bolted to the stringers.
VENTILATION:
Power blowers with flexible pick-up tubing . Natural, flow ventilation provided by hull vents.
COOLING SYSTEM
TYPE:
Closed reservoir type cooling with raw water cooled exhaust.
RAW WATER STRAINERS:
Bronze alloy with sight glass.
HOSES AND CLAMPS:
Reinforced rubber hose double clamped
SEACOCKS AND STRAINERS:
Ball valve type.
TRANSMISSIONS
MANUFACTURER:
ZF Marine Model# ZF 325
GEAR RATIO:
Transmission tag: 2.037 ratio.
FLUID LEVEL AND CONDITION:
Normal level
PROP SHAFTS:
Stainless steel 2.5" diameter.
STUFFING BOX:
Dripless Shaft Logs.
FUEL TYPE:
Diesel.
NUMBER OF TANKS:
Two (2)
TANKS CAPACITY:
Diesel fuel 600 total gallons.
SECURED:
Metal straps with chafe protection.
LOCATION:
Fuel tanks are port and starboard, accessed from engine room.
FILL PIPE LOCATIONS:
Port and starboard side decks marked for Diesel.
FUEL FILTERS:
Both remote mounted fuel/water separator type and engine mount spin on/off type.
E
LECTRICAL SYSTEMS
(DC SYSTEM)
VOLTAGE:
12 / 24 volt system.
BATTERIES:
Five (5) 8D AGM batteries, and One(1) Group 31 AGM battery for generator start
MAIN BATTERY SWITCHES:
Seven (7) Guest rotary switches sighted in engine room.
PANEL:
The main electrical panel was mounted in the salon. Secondary breaker panels inbound port and
starboard in engine room.
CHARGING SYSTEM (BATTERY CHARGER):
two (2) Charles, 20 Amp and 60 amp 5000 SP series chargers.
ELECTRICAL SYSTEM (AC SYSTEM)
SHORE POWER INLET:
Dual retractable 50 amp shore power cords aft.
MAIN BREAKER:
In the main electrical panel in engine room.
CIRCUIT LOAD MONITORS:
Voltage and amperage Digital gauges in the main electric panel. For both the AC and DC systems.
OUTLETS:
Various AC outlets available throughout vessel. GFCI (ground fault circuit interrupter)
at weather decks, galley and heads.
GALVANIC ISOLATOR:
Charles ISO Boost 50.
OTHER:
Charles IQ 2600 Inverter Powered up. Test further.
GENERATOR
MANUFACTURER:
Kohler Diesel Model# 23EOZD
PUMPS:
Dual 24 Volt demand pump type filter inline at pump.
HOSES AND CLAMPS:
PEX and reinforced plastic tubing at various areas throughout vessel.
DOCK SIDE PRESSURE REGULATOR:
Pressure regulator at dock side hose connection.
HOT WATER SYSTEM:
TYPE:
110 electric marine grade
MANUFACTURER:
Whale Model# S1900E Serial#
CAPACITY:
20 gallons.
PRESSURE RELIEF VALVE:
Copper pressure relief valve built into tank. Drainage: Directly to bilge.
BLACK WATER
MANUFACTURER:
Vacuflush
NUMBER OF HEADS:
Two (2) heads on vessel.
VENTED LOOP:
Yes.
GREY WATER
BASINS, SHOWERS, HOSES AND CLAMPS:
The upper basins on the vessel drain to thru-hulls in immediate area of basin. The shower and head
sink basins drain to a sump and is pumped overboard.
SUMP TANK LOCATION:
Midships bilge area, centerline.
MATERIAL:
Plastic, specific type not determined.
PUMPS:
Remote bilge pump, float switch activated.
Engine Count
2
Engine Horse Power
715 HP
Engine Hours
1370
Engine Location
Starboard
HULL
Hull Material
Fiberglass
Hull Shape
Semi-Displacement
ELECTRICAL EQUIPMENT
Holding Tanks
(80 Gallons)
OTHER
Double Berths
2
Bridge Clearance
19 ft 11 in
Dry Weight
54500 lbs
Engine Year
2008
Engine Type
Inboard
Fuel Tanks
(600 Gallons)
Head Room
6 ft 6 in
No of Heads
2
The Marquis 50 LS is 52 feet long that boasts a 15 feet beam. This 2008 diesel Marquis 50 LS powered by Volvo Penta D12 with 715 HP horsepower. The Marquis 50 LS is made of fiberglass. This vessel comes equipped with holding tanks .