$12,442
LENGTH:
29.49 ft.
|
YEAR:
1972
LOCATION:
Gosport
OFFERED BY:
Boatshed
$12,448
LENGTH:
25.49 ft.
|
YEAR:
1973
LOCATION:
Isle of Wight
OFFERED BY:
Boatshed
$10,581
LENGTH:
29.86 ft.
|
YEAR:
1970
LOCATION:
Walton on the Naze
OFFERED BY:
David Morris Ltd
LENGTH:
27.4 ft.
|
YEAR:
1970
LOCATION:
Neyland, Pembrokeshire
OFFERED BY:
Boatshed
$12,386
LENGTH:
31.0 ft.
|
YEAR:
1975
LOCATION:
Pembroke Dock
OFFERED BY:
Network Yacht Brokers
LENGTH:
31.99 ft.
|
YEAR:
1976
LOCATION:
Plymouth
OFFERED BY:
Network Yacht Brokers
$9,896
LENGTH:
25.98 ft.
|
YEAR:
1966
LOCATION:
Portishead
OFFERED BY:
Boatpoint
$11,204
LENGTH:
25.75 ft.
|
YEAR:
1979
LOCATION:
Conwy
OFFERED BY:
Boatpoint
Boat not available.
LOCATION
Conwy United Kingdom
YEAR
1972
LENGTH
29.99 ft.
Condition
Used
Name
Bryn Mawr
Year
1972
Make & Model
Dufour Arpege 30
Boat type
Sail
Length
29.99 ft.
Fuel Type
Diesel
Location
Conwy United Kingdom
Tax status
Paid
Beam
9.91 ft.
Berths
5
Cabins
2
Draft Max
4.59 ft.
LWL
22.01 ft.
Here is an opportunity to own a real classic pocket cruiser that has benefited from many key updates. The Arpege 30 by Michel Dufour was way ahead of its time technology-wise. Lying Conwy Marina
Construction:
Dufour Arpege 30, built by Dufour Yachts (France) to a design by Michel Dufour.
The Arpege was designed by Michael Dufour in 1966 as the first of his volume production boats. It quickly gained a reputation in Half Ton Cup racing. However, it was also a spacious boat, with a very broad beam for its time, as a review in 1966 commented "it is astonishing how much space below the increase in beam makes." A total of 1136 were built between 1966 and 1975.
The deck and hull are fiberglass sandwich cored with foam.
The keel is a cast iron fin, with an exaggerated bulb, that tails towards the back and has a broad, flat base. The keel is fitted into a recess moulded into the hull bottom. The narrow rudder has a deep narrow skeg, with a consequential short tiller that gives adequate control.
Mechanical:
Volvo Penta MD2B 25hp raw water-cooled diesel engine, shaft drive to a twin-bladed bronze propeller.
Diesel heater (2019)
New exhaust elbow (2020)
Electrical:
12v Batteries - 1 Starter / 2 Domestic
240v Shore power system (2016)
Solar panel with Marlec control box
Internal LED lighting (2016)
Galvanic isolator
Water:
Cold water supply
New water bag (2019)
Mast and Rigging:
Gold-coloured alloy mast with stainless steel rigging. Standing rigging was replaced in 2018.
Running rigging (2018)
Slab reefed mainsail with three reefing points
Lazyjacks
Furling genoa c/w UV sacrificial protection
Spinnaker pole
Sails valeted in 2018
Deck Equipment:
Anchor, chain, and warp
Fenders (2019)
Mooring warps (2019)
Sprayhood (2016)
Dodgers (2016)
Navigation Equipment:
Compass
Raymarine 2000 Autohelm (2000)
ICOM VHF/DSC radio c/w masthead antenna (2019)
Lowrance GPS Plotter
Radar
NASA Clipper Wind, Depth, & Speed
LED Tricolour and anchor lights (2016)
Mast mounted radar reflector (2018)
Safety Equipment:
Manual and electric bilge pumps
Fire extinguishers
6-Man liferaft (Service due Aug 2023) to include deck mounted cradle.
Other Equipment:
Wetline 265 inflatable dinghy (2020)
Parson 3.6hp outboard engine (2020)
Access to the accommodation via central companionway. Two steps take you onto the engine cover and then the sole. At the foot of the companionway, the navigation area is to starboard and the galley to port. The chart table has a large sloping top chart table, with a large tray below. The galley and navigation area can be closed off from the rest of the cabin. The saloon has two settees with storage below and pilot berths outboard. The fore-peak, which is unlined, contains the heads, storage, and a sail-bin.
New Jabsco marine toilet (2018)
2 Burner gas stove
Diesel heating (2019)
New cushion covers and foam in saloon (2017)
New flooring (2020)
Cruising Speed
5 knots
Engine Count
1
Engine Horse Power
25.0
Engine Location
Center
Propeller Type
2 Blade, Bronze
HULL
Ballast
1383
Hull Material
Fiberglass
Hull Type
Other
OTHER
Double Berths
1
Single Berths
4
Displacement(kgs)
3493 kilograms
Drive Transmission Description
Direct
Engine Type
Inboard
Fuel Tanks Capacity
40 liters
No of Heads
1
Keel Type
Fin Keel
The Dufour Arpege 30 is 30 feet long that boasts a 9.9 feet beam and a draft of 1.4 meters. This 1972 diesel Dufour Arpege 30 powered by Volvo Penta MD2B with 25.0 horsepower. The Dufour Arpege 30 is made of fiberglass.