$24,855
LENGTH:
29.99 ft.
|
YEAR:
1980
LOCATION:
Norwich
OFFERED BY:
Tingdene Boat Sales Limited
LENGTH:
29.53 ft.
|
YEAR:
1979
LOCATION:
Walton on the Naze
OFFERED BY:
David Morris Ltd
$12,397
LENGTH:
23.79 ft.
|
YEAR:
1984
LOCATION:
Norwich
OFFERED BY:
Boatshed
$10,590
LENGTH:
23.16 ft.
|
YEAR:
1972
LOCATION:
Marlow
OFFERED BY:
Boat Showrooms
$18,626
LENGTH:
29.99 ft.
|
YEAR:
1972
LOCATION:
Newhaven
OFFERED BY:
Boatshed
$20,557
LENGTH:
29.99 ft.
|
YEAR:
1970
LOCATION:
Rochester
OFFERED BY:
Network Yacht Brokers
$25,000
LENGTH:
19.0 ft.
|
YEAR:
1997
LOCATION:
Homestead Air Force Base, Florida
OFFERED BY:
POP Sells
LENGTH:
41.17 ft.
|
YEAR:
1965
LOCATION:
Stuart, Florida
OFFERED BY:
United Yacht Sales
Boat not available.
LOCATION
Brightlingsea United Kingdom
YEAR
1981
LENGTH
26.74 ft.
Condition
Used
Name
Staffin
Year
1981
Make & Model
Seamaster 815
Boat type
Sail
Length
26.74 ft.
Location
Brightlingsea United Kingdom
Tax status
Inc VAT
Beam
8.83 ft.
Berths
4/5
Draft
4.49 ft.
LWL
26.74 ft.
With a reputation for solid, well-built boats, Seamaster was one of the largest boat builders in the 1960s and 1970s producing a wide range of sailing yachts and motor boats. The Seamaster 815 was in production from 1976 to 1981 and a total of 136 were built. Designed by Holman and Pye, the Seamaster 815 took on a much more modern style than was traditionally seen from the Seamaster stable, yet the 815 model retained the companys reputation for dependable boats. "Staffin" is one of the last Seamaster 815s to be built, having left the factory in 1981. This family cruising yacht is the fin keel variant, and boasts an open and airy interior with a maximum internal headroom of 1.8m (510"). The hull is a moderate displacement hull, and the design has sufficient sail area to give good performance. Soft furnishings and some internal joinery will be required to complete. The boat presents a fantastic opportunity for affordable cruising for someone with the ability to complete the interior refit, and re-install an engine if required or adapt her for an outboard engine.
NB - being sold as a 'project' - it will require a level of refurbishment. Sold strictly as seen and sub-standard with faults unlisted.
Deck: Mainsail and genoa. Four sails in total, including a roller furling genoa and 3 hanked on sails. Sails have been dry stored and are in good condition -34.75sq m (374sq ft). Stainless steel pulpit. Cleats. Guard wires. Anchor locker.
Cabin: 2 berths in fore-cabin with hatch to deck. 1 berth in starboard quarter cabin. C shaped seating to port side - converts to double berth / 2 single berths in saloon. (No Cushions) Quarter berth to starboard side. Removable table. Galley with sink and teak lockers. Sea toilet in separate compartment. Storage.
Cockpit: Cockpit table. Tiller steering. Cockpit seating with storage under.
Electronics:
Machinery: "Staffin" has been used on Rutland Water in recent years. Accordingly, she has had her engine removed, but the shaft tube remains and is capped off.
Trailer: A SBS Double Wheel special with cradle - Only covered 150 miles to date. Available by separate arrangement for a sum of £4,500
HULL
Hull Material
GRP
Hull Number
387063
OTHER
Keel Type
Fin
The Seamaster 815 is 27 feet long that boasts a 8.8 feet beam. The Seamaster 815 is made of grp.