Search Similar
  1. Home

Boats similar to Hunter H26

boat-cover

44.0 ft.

|

2003

Sarasota, Florida

SYS Yacht Sales

boat-cover

25.75 ft.

|

1996

United Kingdom

Shepherds (Windermere) Ltd

boat-cover

26.38 ft.

|

1988

Portsmouth

Boatshed

boat-cover

32.15 ft.

|

2002

Poole

Harbour Yachts

boat-cover

26.35 ft.

|

1986

Suffolk

Boatshed

boat-cover

25.75 ft.

|

1985

Norfolk Broads

Boatshed

Boat not available.

Hunter H26 for sale in Charleston, South Carolina United States of America

LOCATION

Charleston, South Carolina United States of America

YEAR

1995

LENGTH

25.98 ft.

DETAILS

Condition

Used

Year

1995

Make & Model

Hunter H26

Boat type

Sail

Length

25.98 ft.

Location

Charleston, South Carolina United States of America

Tax status

Ex VAT

MEASUREMENTS

Beam

8.99 ft.

Berths

4

Cabins

1

Draft

6.0 ft.

DESCRIPTION

- Stock #Well maintained 1995 Hunter H26 with tons of upgrades! Ready to sail! The Hunter 26 is a pocket cruiser with a retractable, keel and is water ballast for ease of transport. The rig is a fractional sloop. The cockpit is large and roomy with a walk-off transom. With the ballast tanks flooded, The H26 displaces 4,600 lb. With the ballast tanks empty the boat weighs in at 2,600 pounds.

Well maintained 1995 Hunter H26 with tons of upgrades! Ready to sail! The Hunter 26 is a pocket cruiser with a retractable, keel and is water ballast for ease of transport. The rig is a fractional sloop. The cockpit is large and roomy with a walk-off transom. With the ballast tanks flooded, The H26 displaces 4,600 lb. With the ballast tanks empty the boat weighs in at 2,600 pounds. The ballast is drained at the launch through a valve in the bottom of the hull. The boat has a draft of 6.00 ft with the centerboard extended and 1.75 ft retracted. The boat can be easily beached. The cockpit has a built-in self-draining fuel locker, stern rail seats, and a settee locker to port. The battery switch and shore power are also in the settee locker. This particular H26 also has a solar charging setup. At anchor, a dinette table is inserted into a receiver in the cockpit deck. The dinette stows in a recess under the V-berth. There is also a self-draining anchor locker on the bow. On deck, you will find two deck organizers and two rope clutches, and a cam cleat to starboard. On this particular H26, the owners have added three additional rope clutches and an additional deck organizer to port for a total of 6 line controls on deck. All lines are now led back to the cockpit. The owner also added a traveler for the main sheet that sits on the bridge deck. See photos in supplied link to a more complete showing of upgrades. Inside you will find an enclosed head with a sink to port and a galley to starboard. The galley has a 2-burner original alcohol stove and sink with a foot pump. Under the cockpit is a queen berth with a port that opens onto the cockpit. Forward is the v-berth and the salon table that can be raised and rotated to add length to the v-berth. Three additional opening ports (forward, galley, and head) complete the cabin. Equipment: NEW or ADDED New VHF with AIS and RAM mic 2020 New Main Sail 2018 New Genoa 2019 New Companionway Cover 2018 Added a TP 10 Simrad auto tiller New Bulkhead Compass 2020 New Battery Charging System 2017 Upgraded the battery system to Two Deep Cycle Batteries 2019 Added a 5W solar panel and charge controller 2018 Added three additional rope clutches and a deck organizer to port 2020 All lines are now lead to the cockpit Added a traveler system 2020 Replaced all of the fairleads for the roller furler system. 2019 Replaced the sheaves in boom end and replaced the end cap.2017 Replaced the mast foot 2021 Added a stern anchor Split the 6-gallon fuel tank into two separate 3-gallon tanks for better fuel monitoring and ease of carry. Replaced the keel lift line (2017) Replaced the gasket on the ballast tank. Replaced the trailer breaks, master cylinder and hitch. Replaced the trailer pads and carpet. Replaced the winch strap and safety chain. Also Included Used spinnaker (could use some patching) The boat is not set up for a spinnaker but the sail does fit the boat. We are looking for people all over the country who share our love for boats. If you have a passion for our product and like the idea of working from home, please contact seller to learn more. This listing has now been on the market a couple months. Please submit any and all offers today! Reason for selling is recent move and location, moving to different style vessel. At Pop Yachts, we will always provide you with a TRUE representation of every vessel we market. We encourage all buyers to schedule a survey for an independent analysis. Any offer to purchase is ALWAYS subject to satisfactory survey results. You have questions? We have answers. Call us atto discuss this boat. Selling your boat has never been easier. At Pop Yachts, we literally sell thousands of units every year all over the country. Calland we'll get started selling your boat today. Take a look at ALL ***69 PICTURES*** of this vessel on our main website at POPYACHTS DOT COM. We appreciate that you took your time to look at our advertisement and we look forward to speaking with you!

PROPULSION

Engine Count

0

Engine Tankage

22.71

SAILS

Genoa

Yes

Mainsail

Yes

Winches

Yes

ADDITIONAL INFORMATION

HULL

Designer

Rob Mazza

Hull Color

White

Hull Material

Fiberglass

Hull Type

Fiberglass

NAVIGATION EQUIPMENT

Compass

Yes

Navigation Lights

Yes

Vhf

Yes

ELECTRICAL EQUIPMENT

Battery

Solar

GENERAL EQUIPMENT

Anchor

Yes

Bimini

Yes

OTHER

Builder

Hunter

Genoa

Yes

Mainsail

Yes

Winches

Yes

ABOUT HUNTER H26

The Hunter H26 is 26 feet long that boasts a 9 feet beam. The Hunter H26 is made of fiberglass. This vessel comes equipped with anchor, battery, bimini as well as being equipped with compass, navigation lights, vhf.