$21,145
LENGTH:
27.99 ft.
|
YEAR:
1989
LOCATION:
Cumbria
OFFERED BY:
Maiden Marine Ltd
$24,821
LENGTH:
29.82 ft.
|
YEAR:
1989
LOCATION:
Poole
OFFERED BY:
Clipper Marine Limited
$43,484
LENGTH:
29.99 ft.
|
YEAR:
2001
LOCATION:
Chichester
OFFERED BY:
Network Yacht Brokers
$32,286
LENGTH:
25.98 ft.
|
YEAR:
2002
LOCATION:
Burnham-on-Crouch,
OFFERED BY:
CLARKE & CARTER YACHT BROKERS
$12,442
LENGTH:
21.52 ft.
|
YEAR:
2003
LOCATION:
East Cowes
OFFERED BY:
Boatpoint
$124,412
LENGTH:
37.01 ft.
|
YEAR:
2007
LOCATION:
Largs
OFFERED BY:
DDZ Marine Ltd
$32,943
LENGTH:
30.68 ft.
|
YEAR:
1996
LOCATION:
Hindeloopen
OFFERED BY:
De Valk Yacht Brokers
$778,265
LENGTH:
69.36 ft.
|
YEAR:
1996
LOCATION:
Imperia
OFFERED BY:
BERNARD GALLAY Yacht Brokerage
Boat not available.
LOCATION
Newcastle Upon Tyne United Kingdom
YEAR
1983
LENGTH
25.0 ft.
Condition
Used
Year
1983
Make & Model
Etap 26
Boat type
Sail
Length
25.0 ft.
Fuel Type
Diesel
Location
Newcastle Upon Tyne United Kingdom
Beam
2.76 ft.
Berths
3
Draft Max
2.59 ft.
LWL
6.59 ft.
The ETAP 26 is a recreational keelboat, built predominantly of GRP, with wood trim. It has a fractional sloop rig, a raked stem, plumb transom an internally mounted spade-type rudder controlled by a tiller and a lifting keel.
The design has sleeping accommodation for 5 people, with a double "V"-berth in the bow cabin and In the saloon there is one double and one single berth with stowage under.
The ETAP 26 is a recreational keelboat, built predominantly of GRP, with wood trim. It has a fractional sloop rig, a raked stem, plumb transom an internally mounted spade-type rudder controlled by a tiller and a lifting keel.
The design has sleeping accommodation for 5 people, with a double "V"-berth in the bow cabin and In the saloon there is one double and one single berth with stowage under.
The boat is fitted with an inboard Volvo MD5C, 10hp diesel engine. Fuel capacity 30 litres in one stainless steel tank with a sail drive for docking and manoeuvring.
There are also 1 x 12v battery charged via the engine alternator.
Deck stepped aluminium mast and boom. Bermudan sloop rig.
Stainless steel standing rigging and terylene running rigging.cruising chute with snuffer. Lines led back to cockpit via organisers and clutches.
Sails include a slab reefing main with sail cover and a roller furling headsail.
In the saloon there is one double and one single berth with stowage under & a hanging locker.
There is a Large chart table with chart stowage under.
There are lockers around the cabin sides and under chart table for extra storage.
This vessel has a centre folding dining table with bottle stowage , Double v berth in the forepeak with shelves above and stowage under.
In the heads there is a toilet, washbasin, stowage under and wardrobe with shelves and hanging space.
This ETAP 26 was built by ETAP Yachting in Belgium in 1986 GRP Constructed with a wood trim.
The lifting fin keel ensures good sailing performance, whilst allowing access to shallow water, the keel bulb has a large flat bottom. Hull topsides are polished and underwater areas are antifouled ready for season.
The double skin moulding and foam infill is designed to make her unsinkable, this is also excellent insulation, making her a comfortable and dry boat that is easy to keep clean.
Cruising Speed
5 knots
Engine Count
1
Engine Horse Power
10.0
Max Speed Knots
6
HULL
Hull Material
Fiberglass
OTHER
Double Berths
2
Single Berths
1
Displacement(kgs)
1045.98 kilograms
Drive Up
0.48 meters
Engine Type
Inboard
No of Heads
1
Keel Type
Lifting Keel
The Etap 26 is 25 feet long that boasts a 2.8 feet beam and a draft of 0.79 meters. This 1983 diesel Etap 26 powered by Volvo MD5C with 10.0 horsepower is capable of reaching a maximum speed of 6 knots and a cruising speed of 5 knots. The Etap 26 is made of fiberglass.