Search Similar
  1. Home

Boats similar to Custom Boats 46ft Steel Cutter

Boat not available.

Custom Boats 46ft Steel Cutter for sale in Galicia Spain

LOCATION

Galicia Spain

YEAR

1984

LENGTH

46.0 ft.

DETAILS

Condition

Used

Year

1984

Make & Model

Custom Boats 46ft Steel Cutter

Boat type

Sail

Length

46.0 ft.

Fuel Type

Diesel

Location

Galicia Spain

Tax status

Paid

MEASUREMENTS

Beam

14.5 ft.

Draft Max

6.07 ft.

LWL

40.42 ft.

DESCRIPTION

46ft Steel Blue-Water Cutter, Meticulously built and expertly crafted by Col Cuneo & Naut Yachts in Sydney, Australia, following the innovative design of Bill Bollard. With unwavering durability, this vessel is the perfect companion for exhilarating long-distance journeys.

This cruiser promises an unforgettable journey, where every detail is carefully considered for a seamless and secure sailing experience. Cutter rigged, hydraulic wheel steering, an 84HP Perkins engine, Bowthruster, Generator, Windgens, Solar Panels, Watermaker, and even a washing machine. Offering ample space for up to 7 guests, including two double cabins and 3 saloon berths, comprehensive Nav and Safety gear. The yacht is currently moored in Galicia, Northern Spain, conveniently located near Santiago de Compostela.

Recently surveyed in 2023, the yacht has shown a few issues that may need addressing, all of which have been reflected in the recent price reductions. Survey report available on request.

Construction

Designed by Bill Bollard (Bollard 116), Constructed by Col Cuneo and fitted out by Naut Yachts in Sydney Australia.

Round bilge with long fin & skeg hung rudder. Built of mild steel plating on widely spaced frames and the hull is insulated with 30mm polyurethane spray foam from waterline up.

Wagner hydraulic wheel steering (with manual emergency tiller). Teak laid decks on ply epoxied to deck.

Interior finished in varnished teak and bird’s eye maple with teak and holly soles.

LOA –         46’ 7”
LWL –         40’ 5”
Beam –       14’ 5”
Max Draft – 6’ 11”
Ballast –      C.5T
Displacement – C.20T

Machinery

Engine: Perkins 4236 84HP – Installedhours.
Gearbox – Paragon V.
Prop – Variprop Folding 3 blade.
Generator – Paguro 4000 – 2960 hours from new, but engine replaced @ 1450 hours in 2010.
Vetus 80Kgf Bowthruster
Watercraft 160LPH watermaker.

Electrics

12V/240V systems. Charging by Solar + Wind + Diesel Genset + Main engine Alternator.
200Amp Amptech Alternator on main engine. Paguro 4000 Diesel Genset.
560W Solar panels.
2 x Marine Kinetix Mk4 400W Wind generators. New 2017.
900AH Deep cycle house battery in two banks, separate engine start battery. In need of replacement.
Shore power via isolation/step up/down transformer.
Victron Phoenix MultiPlus 12/300/120 - 3KW/120A Full sine wave Inverter/Charger. Victron Centaur - 80 Amp Charger.

Tankage

Fuel: c. 650 Litres in 3 tanks. Two mild steel tanks built into hull @ c.190L each + 1 S/S stern tank @ c. 270L
Water: c. 470 Litres in 2 S/S tanks amidships.
Holding: Black water tank in forward head with pump out via deck valve.

Rig And Sails

Cutter rigged with slab reefing main, self-tacking club footed staysail and roller reefing Genoa. Walder boom brake. Spinnaker pole mounted on slider on mast.

Folding steps from deck to top of mast. Standing rigging replaced 2014.
Sails: Mainsail – Fully battened, by Kemp 2004. Genoa – Bi-radial, by Arun 2003. Staysail, by Arun 2003. Asymmetric Spinnaker + Storm Jib + Yankee + Trysail, by Hood. Plus spare Genoa and drogue.

Winches:
2 x Enkes SS28
1 x Enkes SS28 ASC Electric 2 x Maxwell SS28
2 x Antal 3W30 (at mast)

Accommodation

Accommodation for 7 in total.
Two double cabins. Stern master cabin has ensuite shower/head.
2M headroom in all cabins and saloon.
Interior fit out in teak and maple with Alcantara upholstery.
2 heads with showers and electric Lavac toilets.

Domestic

Force 10 – 3 burner cooker with oven and grill (2016).
Gas BBQ.
Isotherm larder refrigerator – also has small freezer compartment (2016).
Chest fridge with Waeco air/water cooled compressor - can also be run as a freezer.
Double S/S sinks.
Zanussi 3kg compact washing machine.
Isotemp 50L calorifier heated by main engine or immersion heater.
Webasto AirTop 5000 Diesel heating (will need servicing).
CD Player, radio, TV.

Deck

Quick Hector 1500W twin Gypsy windlass – new 2017.
Rocna Vulcan 33kg anchor.
Bruce 33kg anchor.
Bugel type 35kg SS anchor.
Fortress Guardian G23 aluminium anchor. SS Rock hook.
120metres 10mm chain – new 2016.
100m x 25mm nylon rode with chain leader in anchor locker. 100m x 22mm nylon rode with chain leader on stern drum.
Davits + deck chocks for dinghy. Boarding ladder and passarelle.
Large quantity of warps and fenders.
All nav lights LED.

Navigation

Robertson 200DL autohelm driving hydraulic steering via Simrad RPU80 pump. Taurus wind vane steering with auxiliary rudder.

Wind instruments – VDO (in cockpit and at nav station).
Log and depth instruments - Navman (in cockpit and at nav station).
Radar – Raymarine SL72.
Compass – Saura.

VHF – Eagle (+ portable).
HF – Icom 802 with AT 140 Tuner + Pactor 3 modem.

GPS – Navman (+ portables).
AIS – 2 NASA units. 1 stand alone and 1 feeding to nav computer.
Nav PC at chart table running OpenCPN and other Nav software, with world charts, linked to GPS and AIS.
Tablet PC with matching software and GPS available in cockpit at wheel.

Tenders

Caribe 3.1m RIB.
Yamaha 4 stroke 15HP.
Johnson 2 stroke 15HP.

Safety

Liferaft Viking 4 person Off Shore. (Serviced 2017)
EPIRB ACR GLOBALFIX (New 2017)
Large quantity of flares – some expired but 1 Off Shore pack new 2017.
2 x Lifebuoys + Dan buoy.
Emergency tiller for both main and auxiliary rudder.
SS Jack stays stern to bow on both sides.
Various fire extinguishers including automatic in engine room.
Belt driven bilge pump on main engine.
Electric Rule 4000GPH bilge pump in bilge sump.
2 x manual bilge pumps (below and in cockpit).
Fog horn on targa arch.
Bolt cutters.

(The condition or level of safety equipment on board is not to be negotiated on following survey. It is likely to be listed by most surveyors but is not structural or an integral working part of the vessel and is not to be used to further negotiate the price down after survey. We strongly suggest that for your own personal safety that when purchasing a yacht you provide new safety equipment rather than relying on second hand gear.)

Cruising History And Comments

Cruising history in current ownership:
Portugal, Mediterranean, Canaries, Cape Verdes, Brazil, South America, The Caribbean, Venezuela, Colombia, Central America, The Bahamas, The USA and now back to Northern Spain.
More details on Comments:

We have owned Samarang since 2001 and covered nearly 30,000 miles. She has carried us safely and comfortably during all that time and that’s exactly what she was designed to do. It is now time for us to go and do something different and to pass Samarang into someone else’s care. She has always been scrupulously maintained and continually upgraded during our ownership and we hope that will show when you come to visit her.

When Samarang was lifted she was pretty much ready to go, however, the problems of the last three years have meant that she has been on the hard for much longer that we ever expected. Whilst she has continued to be maintained by a local technician and kept dry with a dehumidifier, we recognise that it will now require some work before she sets sail and this is reflected in the price.”.

Title Documents And Tax

Listed below are the documents/or copies of what we have seen on listing this yacht.

Current Certificate of British Registry – Part 1
Bill of Sale to current owners 2001
EU VAT paid in UK to HMRC 2001
(vessel in the EU ashore 31st Dec 2020 Brexit)
Builders Certificate.
Previous Australian De-Reg Cert.
Copy of previous sales receipt.

Disclaimer And Travelling To Inspect

The Company offers the details of this vessel in good faith. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

By contacting Williams & Smithells Ltd from this yacht portal or our website direct you are agreeing to provide us with your contact details relating to your interest in purchasing a yacht. We will use these details to contact you offering suitable yachts in the future. If you no longer wish to be sent yacht details or promotional information please send an email stating you wish to opt-out and be removed. 

Please contact Williams and Smithells to book an appointment to inspect any yacht before you book flights or pay for travel. This is to ensure you have a confirmed booking in our diary with the right amount of time allocated to inspect the yachts you want. Our yachts are not all in one marina, yard or harbour and in season do change locations. To avoid disappointment, call or email before you make travel plans.  

PROPULSION

Engine Count

1

Engine Horse Power

84.0

Engine Hours

4165

Propeller Type

3 Blade, Folding

ADDITIONAL INFORMATION

HULL

Designer

W. Bollard & Partners

Hull Material

Steel

OTHER

Drive Transmission Description

Direct

Engine Year

1997

Engine Type

Inboard

No of Heads

2

Keel Type

Fin Keel

ABOUT CUSTOM BOATS 46FT STEEL CUTTER

The Custom Boats 46ft Steel Cutter is 46 feet long that boasts a 15 feet beam and a draft of 1.85 meters. This 1984 diesel Custom Boats 46ft Steel Cutter powered by Perkins 4236 with 84.0 horsepower. The Custom Boats 46ft Steel Cutter is made of steel.