LENGTH:
24.02 ft.
|
YEAR:
2019
LOCATION:
Levington,
OFFERED BY:
CLARKE & CARTER YACHT BROKERS
LENGTH:
24.84 ft.
|
YEAR:
2018
LOCATION:
United Kingdom
OFFERED BY:
Red-Ensign
LENGTH:
24.84 ft.
|
YEAR:
2017
LOCATION:
United Kingdom
OFFERED BY:
Red-Ensign
LENGTH:
24.84 ft.
|
YEAR:
2023
LOCATION:
United Kingdom
OFFERED BY:
SAIL X ltd
Boat not available.
LOCATION
Chichester United Kingdom
YEAR
2019
LENGTH
25.0 ft.
Condition
Used
Year
2019
Make & Model
Cornish Crabber Shrimper 21
Boat type
Sail
Length
25.0 ft.
Location
Chichester United Kingdom
Tax status
Inc VAT
Beam
8.01 ft.
2019 Cornish Shrimper Gaff rigged. GRP hull, Dark Blue, copper coated hull, GRP deck and superstructure, steel centre plate with s/s/ lifting wire leading to a winch operated from cockpit, Yanmar 1GM210 9HP diesel inboard shaft driven engine, 4 berths in 1 cabin, (double forward, 2 x singles in saloon), light blue upholstery, sea w.c. with holding tank, Dacron tan mainsail, topping lift, roller jib Dacron in tan, Bowsprit laminated in Sitka Spruce & Sikkens Cetol treated, boom cover in maroon, spray hood, 12v battery, twin burner gas cooker, equipment includes compass, Raymarine ST1000 autopilot, VHF aerial with wind indicator, depth displayed on Raymarine Axiom 9inch plotter, 2 x batteries (1 x engine, 1 x domestic), bilge pump, feathering prop.
Broker's Comments: "A superb day sailor/weekeder Shrimper 21 - from the Masters of Cornish Crabbers LLP, being from 2019, she is also fitted with a number of both technological and domestic refinements. With Silka spruce spars, Parchment coloured decks and Dark Blue topsides, she is a picture and would grace any anchor. Four berths and full facilities below deck is also ideal for overnighting/weekending or longer for the more intrepid."
Please callfor an appointment to view. (Please note that we are closed on Sundays).
Hull & Superstructure:
Hand laid solid GRP hull with no foam core
Integral centreboard case laminated as part of the complete hull structure
Internal bunk & forepeak moulding bonded into hull with internal structural bulkheads bonded to both hull and deck mouldings. Dark Blue hull
The hull and deck joint is by way of overlap or "Biscuit Tin Lid" with GRP bonding
Engine beds are incorporated in the GRP bunk moulding with mild steel mounts bonded into the bed design, which incorporates an oil drip tray
A single boot top moulded in gel coat located above antifouling level
Colour in contrast to main hull and matching the deck
Chain plates are in stainless steel an through bolted on the hull sides
Approx. towing weight: 2,000 kg/4,410 lb.
Antifouling - Coppercoat.
Deck:
Hand laid GRP with Balsa core in way of horizontal load areas
Hard wood pads under deck fittings and stress points
Two tone decks in parchment
Keel & rudder:
The rudder is transom hung on two stainless steel hangings bolted through the transom with Hardwood backing pads
The rudder is constructed from laminated Plywood with a stainless steel lifting drop plate
Ballast is by way of iron punching's encapsulated in resin inside the hull moulding
A galvanised steel centre plate forms part of the ballast with a stainless steel lifting wire leading to a winch lifting system operated from the cockpit
12 volt DC system
Fuse panel
12v socket - cigar type for phone charging etc., additional USB socket
Gauges.
Battery Banks:
Engine - one 12 volt 88 amp/hour
Additional house battery with upgraded switch.
Alternator:
A 55 amp (12v) alternator is fitted to the engine.
Plumbing systems:
Manual fresh water.
Bilge pump:
1 x manual bilge pump operated from the cockpit with a handle stored in the aft locker.
1 x bilge pump handle stowed in aft cockpit locker
Tankage:
Inlet/outlet fittings: Engine: In through a single skin fitting with a valve and strainer, out via the exhaust system.
Gas system: There is a twin burner hob cooker attached to a separately stored gas bottle
Fuel:
A plastic diesel tank with a capacity of approximately 38 litres, breather and integrated fuel gauge
The tank is fitted with flow and return lines, the flow line having a manual shut off valve
Fuel filler & tank vent
Fresh water:
2 x 10 ltr plastic jerry cans with manual hand pump
Also a stainless sink
Grey water/holding tank:
When fitted the heads discharge directly to sea via a vent loop and skin fitting
Holding tank 28 ltr
Lower shrouds & forestay in 4mm 1 x 19 s/s wire with swagged ends
Chromed rigging screws
Jib mounted on reefing spar and controls led aft to cockpit
Main throat/peak halyards - 8mm braid
Jib & staysail halyards - 8 mm braid
Main topping lift - 8mm braid
Mainsail reefing lines - 8mm braid
Mainsail outhaul - 8mm braid
Mainsheet & jib sheets - 10mm sheet rope
All associated blocks for purchase tackles.
Winches:
1 x winch handle
2 x control line/halyard winches at companionway
Sails:
Mainsail: Dacron in tan. 2 reef points with tie in lacing
Jib: Dacron in tan with wire luff and tell tails
Fixings to allow for topping lift and mainsheet take off
Sail area: 252ft2/23.6ft2
UV protection for jib
Deck:
4 x stainless steel deck cleats are positioned aft and amidships with two fairleads feeding a teak Sampson post forward
7kg Plough type anchor c/w 30M x 12mm warp and 4m x 8mm chain
Boathook - with additional whisker pole attachments on mast
Fenders
2 x 40' multi plait 12mm mooring warps
Covers, canvas & cushions:
Boom cover in Maroon
Sprayhood - acrylic with stainless
Safety:
Life harness attachment point by the companionway
Fire fighting:
1 x fire extinguisher
Navigation:
Compass bulkhead mounted
Raymarine ST1000 autopilot
VHF aerial with wind indicator
Wind instrument - Raymarine i60
Raymarine Axiom 9" plotter with chart, in hull transducer
Depth displayed on the plotter
Galley:
2 burner gas hob
Heads:
Sea w.c. inc. holding tank 28ltr with electric waste pump and deck flush.
Ventilation:
Is via a washboard vent and opening forward hatch
Lighting:
Electric cabin lights LED (saloon and forward berth)
Navigation lights (Masthead LED)
Engine Count
1
Engine Horse Power
9|horsepower
HULL
Hull Material
GRP
OTHER
Keel Type
Lifting Keel
The Cornish Crabber Shrimper 21 is 25 feet long that boasts a 8 feet beam. This 2019 Cornish Crabber Shrimper 21 with 9|horsepower horsepower. The Cornish Crabber Shrimper 21 is made of grp.