Carver 36 MY for sale in Seattle, WA United States of America

The Condo offers accommodation of a much larger boat. The 36MY shares the same salon floor plan as the bigger 41 CMY model. The updated 2003 floor plan has full beam use utilizing below deck walkway space, opening up to spacious salon seating, with L-shaped lounge/sleeper sofa and a dedicated 4-person dinette and included factory barrel chair. African Cherry wood cabinetry is present throughout, with solid countertops.

The Condo cabin provides big boat features in a very maneuverable hull design.
Carver updated 36 MY in 2005 to have an integrated patio seating bench, not featured before
on this model size. The helm area has twin swivel seats plus L-shaped lounge, and a sink and
storage. Center piloting position provides commanding view.

There are two dedicated sleeping berths. The forward stateroom features an angled double
berth with a settee. The aft master stateroom has a walk around double berth and two settees with additional drawers and hanging locker. Total sleeping accommodations is 6.
The Carver 36MY has twin heads, with the forward head having dual access from fwd
stateroom or salon. The aft master head off the aft master stateroom has a separate shower.
Both heads have Vacu-flush to twin holding tanks, both have Tank-Watch-4 monitoring system.

The Condo has the VolvoPenta 8.1LGi engine option, 375hp/490tq driving dual ZF-
63A 2.5/1 transmissions with twin shaft Michigan 22”x26P 4-blade Bronze Propellers. This
VolvoPenta engine package is extremely low maintenance, being Throttle Body Injection (TBI)
and crank fired Coil/per plug configuration, utilizing standard marine manifolds (no catalytic
converters). The raw water pump is Jabsco design, mounted on the front of the crank, making it easy to service/check. Oil filters are remote and easily accessed via center catwalk.
This 2006 Carver 36MY has the Kohler 7.3E Generator with “sound shield” for un-obtrusive
operation on the water. Both shore power and Generator now run through dual Bridgeport
Magnetics Marine-Puck Isolation transformers for stable 30A 115V and are compliant to 2017
NEC requirements, IMANNA #and Marine UL E509703.

The Condo has Side-Power SE100 (providing 100foot lbs of thrust) 24V 7.5”
diameter tunneled Bow thruster installed. This provides assuring control during windy PNW
moments.

Includes Magma Marine Chefsmate Gas Grill A10-803 with a remote 2.5lb LP tank.
Includes Mercury Marine 270 Rib with Weaver Snap-Davits stern mounts
Includes total of 6 Polyform G6 Fenders ($70 ea) w/lines plus extra swim step fender

Boat Name
The Condo
Dimensions
LOA: 36 ft 11 in
Beam: 13 ft 2 in
LWL: 34 ft 6 in
Dry Weight: 21800 lbs
Engines
Total Power: 750 HP
Engine 1:
Engine Brand: Volvo Penta
Year Built: 2006
Engine Model: 8.1LGi
Engine Type: Inboard
Engine/Fuel Type: Gas/Petrol
Location: Port
Engine Hours: 311
Drive Type: Direct Drive
Engine Power: 375 HP
Engine 2:
Engine Brand: Volvo Penta
Year Built: 2006
Engine Model: 8.1LGi
Engine Type: Inboard
Engine/Fuel Type: Gas/Petrol
Location: Starboard
Engine Hours: 325
Drive Type: Direct Drive
Engine Power: 375 HP
Cruising Speed: 18 knots @ 3600 RPM
Maximum Speed: 25 knots
Tanks
Fresh Water Tanks: (70 Gallons)
Fuel Tanks: (250 Gallons)
Holding Tanks: (36 Gallons)
Accommodations
Number of single berths: 1
Number of double berths: 2
Number of cabins: 2
Number of heads: 2
Electronics
Depthsounder
Navigation center
Plotter
Compass
GPS
VHF
Radar
TV set
Radio
CD player
Cockpit speakers
Inside Equipment
Bow thruster
Electric bilge pump
Battery charger
Heating
Hot water
Microwave oven
Marine head
Refrigerator
Deep freezer
Electrical Equipment
Shore power inlet
Generator - 66hrs
Outside Equipment/Extras
Swimming ladder
Davits
Tender
Covers
Bimini Top
Additional Information

2006 Carver 36MY Aft Cabin Motor yacht (updated 11/6/2021)

Affordable luxury in a very size efficient package! Under 40’ long and under14’ wide.

The updated Carver 36 MY shares the same salon floor plan as the bigger 41 CMY model. The updated

2003 floor plan has full beam use utilizing below deck walkway space, opening up to spacious salon

seating, with L-shaped lounge/sleeper sofa and a dedicated 4-person dinette and included factory barrel

chair. African Cherry wood cabinetry is present throughout, with solid countertops.

The Carver 36 MY Aft cabin provides big boat features in a very maneuverable hull design. Carver

updated 36 MY in 2005 to have an integrated patio seating bench, not featured before on this model

size. The helm area has twin swivel seats plus L-shaped lounge, and a sink and storage. Center piloting

position provides commanding view.

There are two dedicated sleeping berths. The forward stateroom features an angled double berth with

a settee. The aft master stateroom has a walk around double berth and two settees with additional

drawers and hanging locker. Total sleeping accommodations is 6.

The Carver 36MY has twin heads, with the forward head having dual access from fwd stateroom or

salon. The aft master head off the aft master stateroom has a separate shower. Both heads have Vacu-

flush to twin holding tanks, both have Tank-Watch-4 monitoring system.

This 2006 Carver 36MY has the VolvoPenta 8.1LGi engine option, is “open loop” TBI EFI ECM has been

tuned by VolvoPenta for increased cruising MPG while maximizing the torque, providing 375hp/490lbs

driving dual ZF-63A 2.5/1 transmissions with twin shaft Michigan 22”x26P 4-blade Bronze Propellers.

This VolvoPenta engine package is extremely low maintenance, since “open loop” EFI does not need

oxygen sensors or catalysts exhaust, using standard easily sourced marine exhaust pieces. Crank fired

Coil/per plug configuration eliminates cap and rotor maintenance. The raw water pump is Jabsco

design, mounted on the front of the crank, making it easy to service/check. Oil filters are remote and

easily accessed via center engine bay catwalk access. House battery and both starting batteries are

easily accessed beneath the “lift up” catwalk section.

This 2006 Carver 36MY has the Kohler 7.3E Generator with “sound shield” for un-obtrusive operation on

the water. Both shore power and Generator now run through dual Bridgeport Magnetics Marine-Puck

Isolation transformers for stable 30A 115V and are compliant to 2017 NEC requirements, IMANNA #21-

21797-1 and Marine UL E509703.

This 2006 Carver 36MY has Side-Power SE100 (providing 100foot lbs of thrust) 24V 7.5” diameter

tunneled Bow thruster installed. This provides assuring control during windy PNW moments.

Includes Magma Marine Chefsmate Gas Grill A10-803 with a remote 2.5lb LP tank.

Includes Mercury Marine 270 Rib with Weaver Snap-Davits stern mounts

Includes total of 6 Polyform G6 Fenders ($70 ea) w/lines plus extra swim step fender, with hand pump

included.

Upgrades & Maintenance

Upgrades & Maintenance

Upgraded items = $30,240.46

• Added Side-Power SE100 (100lb thrust) 24VDC Bow Thruster wired to twin 12V AGM G24 Deep cycle batteries and dedicated ProMariner battery charger inside 7.5” Thruster Tunnel. $14,00.00 (12/2018)
• Added Twin Bridgeport Magnetics Marine-Puck Isolation transformers model MP3.6-30A meeting 2017 NEC requirements, IMANNA #and Marine UL E509703 $3,523.53 (10/2021)
• Upgraded Helm and patio canvas to Sunbrella with Polycarbonate glass, now with less seams for unobstructed viewing, plus Upgraded exterior 70% salon sunshade, added Sunbrella Helm cover, added Sunbrella power cord cover, $9,500.00 (10/2021)
• Replaced Port side ZF-63A 2.5/1 transmission $2,500.00 (12/2018)
• Added Dark Horse Marine Extended Chain Lead Anchor Rode- 25' of 5/16" G4 Chain with 125’ 5/8" 8-Plait Nylon Rope” $304.93 and Mantus S1 Swivel $82.00 to OEM to 125’ 5/16 G4 Chain (now 250’ total) to OEM 33lb Davis Delta Anchor (6/2020)
• Added Dual 32” LED HD/TV with Swivel mounts
• Main Salon TCL 32” 1080p Roku Smart LED TV-#32S327 $200 (06/2021)
• Master Suite Visio 32” 1080p LED TV (2018)
• Added Kurig K-slim Coffee maker $80 (06/2021)
• Upgraded all interior lighting bulbs to LED $50 (9/2019)
• Added Brita Faucet Filter $30.00 (11/2018)
• Added Fusion Marine MS-BT100 BlueTooth adapter $55

Maintenance items = $9,919.50

• Both port and starboard “factory supplied” Michigan 4-Blade Bronze 22"x26P propellers tuned/balanced by the "Prop Shop" Mukilteo WA, $1,694.44 (10/2019)
• Starboard VP Raw water pumpreplaced with all bronze unit (spare purchased for Future port side) $571.94 (07/2021)
• Complete exhaust update; brand new “updated” lower VP manifolds, gaskets, risers, 4” Hoses, clamps to OEM Mufflers 12/2020 $6,223.13 (12/2020)
• West Marine Group31 GEL Deep Cycle House Battery $459.99 (2/2019)
• Dyno 31P Starting Batteries (pair) $260.00 (8/2021)
• Replaced all 16 (both Motors) AC/Delco Platinum Spark Plugs $40 (6/2020)
• Marinco # 10029XLP Dual Trumpet horns $170.00 (07/2021)
• Fireboy-Xintex CMD6-M Marine CO Carbon Monoxide Detectors replaced in (updated 7yr EOL) $500.00 (11/2019)
• Updated Helm speakers to Fusion XS series 6.5” 200W $169 (6/2020)

7001 Seaview Avenue NW
SUITE 150
Seattle, WA 98117 United States
Toll-free
Tel
Email Us