Search Similar
  1. Home

Boats similar to Custom-Boats Ouyang Boat Works Aloha 30

boat-cover

33.01 ft.

|

1986

North Palm Beach, Florida

POP Sells

boat-cover

18.01 ft.

|

1986

Jacksonville, Florida

POP Sells

boat-cover

20.01 ft.

|

1986

Acton, Maine

POP Sells

boat-cover

27.99 ft.

|

1986

Pawcatuck, Connecticut

POP Sells

boat-cover

46.0 ft.

|

1986

St Catharines, Ontario

POP Sells

boat-cover

44.0 ft.

|

1986

Green Cove Springs, Florida

POP Sells

boat-cover

27.0 ft.

|

1986

RESIDENCE

Boatshed

boat-cover

46.0 ft.

|

1986

Stuart, Florida

United Yacht Sales

View more similar boats Arrow

Boat not available.

Custom-Boats Ouyang Boat Works Aloha 30 for sale in Montreal, Canada

LOCATION

Montreal, Canada

YEAR

1986

LENGTH

29.99 ft.

DETAILS

Condition

Used

Name

X Sail

Year

1986

Make & Model

Custom-Boats Ouyang Boat Works Aloha 30

Boat type

Power

Length

29.99 ft.

Fuel Type

Diesel

Location

Montreal, Canada

MEASUREMENTS

Beam

10.66 ft.

Cabins

1

Draft

5.74 ft.

DESCRIPTION

30' Custom Ouyang Boat Works Aloha 1986

This Aloha 30 Canadian built fractional sloop fixed fin keel sailboat is a great deal for someone looking to get on the water. She has been updated and maintained through the years.


Upgrades
  • 2001 New aluminum keel stepped mast and rigging
  • 2004 New halyard swivel

30' Custom Ouyang Boat Works Aloha 1986

This Aloha 30 Canadian built fractional sloop fixed fin keel sailboat is a great deal for someone looking to get on the water. She has been updated and maintained through the years.


Upgrades
  • 2001 New aluminum keel stepped mast and rigging
  • 2004 New halyard swivel
  • 2007 New full set of screens, new Sea-BQ rail mounted BBQ, new main sail cover, new cockpit lifeline foam pads with Sunbrella covers, new 154 jib Sunbrella protective strip, new dodger and stainless steel frame including bimini and connecting top enclosure.

Vessel Walkthrough
  • There is an optional Highway flatbed trailer that can be purchased if interested
  • 2007 complete new sunbrella enclosure with either mosquito screen panels or full sunbrella panels that zip in.
  • Steel cradle was professionally customized to include a total of 13 points of contact on the hull to allow for a safer and more secure storage and transportation should the need arise. It was designed for long haul highway transport of this exact vessel.
  • The entire hull below the waterline was professionally upgraded to include 3 layers of epoxy barrier.
  • The keel hull joint was professionally inspected and reinforced.
  • Hull ribs were professionally upgraded.
  • No lifelines are included. New lifelines are required. I have all the exact    measurements required.  
  • Completely set up for single handed sailing with all lines leading aft including 3 mainsail reef points. You do not need to leave the cockpit to reef the main.

Galley:

  • Stainless Steel galley sink
  • Pressurized water system plus whale manual pump in galley
  • Hillerange gimbaled 2-Burner propane stove with oven
  • Ice box refrigeration

Electronics and Helm:

  • Pedestal mounted wheel with tiller back-up
  • Spade rudder
  • Galaxy pedestal mount compass
  • Tacktic tri data (depth, speed, sum log) INOP
  • VHF Radio
  • Windex 15
  • Brass Clock and Barometer

Deck:

  • Propane Locker with remote solenoid switch
  • Open Transom
  • Double stainless steel lifeline cables on stainless steel stanchions
  • Teak handrails on coach roof
  • Two Quad and two double organizers on coach roof
  • Aluminum toe rail
  • Anchor 
  • New dodger and stainless steel frame including bimini and connecting top enclosure
  • Stainless steel boarding ladder
  • Full complement of dock lines

Sails and Rigging:

  • Harken mainsheet track and traveler
  • (6) Double spinlock clutches
  • (2) Stand up cheek blocks at mast collar
  • Several cheek blocks on deck and toe rail
  • Stainless steel rigging with spit back stays and back stay tensioner
  • (2) Barient 2-Speed 21 self tailing winches on coach roof
  • (2) Barient 2-Speed 22 self tailing primary winches
  • Dacron main sail
  • 154 Tape drive genoa sail
  • 150 Jib sail
  • 100 Jib sail
  • Spinnaker, Spinnaker sheets and Spinnaker pole
  • Blade sail
  • Profurl rolling furler (new halyard swivel 2004)
  • Self tacking jib hardware

Electrical:

  • 12 Volt and 110 
  • 30 Amp Shore power
  • "Technovolt" constavolt system
  • 50' 30 Amp Shore power cord

Engine and Mechanical:

  • Westerbeke W-13 13 HP diesel 2 cylinder engine
  • Racor fuel filter and H20 separator
  • Wet water pot exhaust
  • "Gori" bronze 15 x 10 RH 2-Blade folding propeller
  • Manual gusher cockpit bilge pump
  • (2) Outlet bilge blower
  • "Seaward" 110 volt heat exchanger

Review by Michael McGoldrick

In a review Michael McGoldrick wrote, "The Aloha 30 is a good example of the new breed of boat which started to emerge from the Canadian sailboat industry in the latter half of the 1980s. These boats were heavily influenced by the French designs which quickly became popular in North America, and they tend to include the mandatory aft cabin. The Aloha 30 was designed by Ron Holland, who became known for coming up with very fast boats, and this 30 footer was a bit of a departure for a manufacturer usually identified with building solid cruising boats. The Aloha 30 has a factional rig, a feature that makes it easier to control the shape of the rather large mainsail. It also has an deep elliptical shaped fin keel, which was all the rage for fast designs in the late 1980s and early 1990s."


Mechanical Disclaimer

Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.


Disclaimer

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.


PROPULSION

Cruising Speed

6

Engine Count

1

Engine Horse Power

13.00

Engine Location

Middle

ADDITIONAL INFORMATION

HULL

Hull Material

Fiberglass

OTHER

Country Built

Canada

Displacement(kgs)

6800

Engine Type

Inboard

Fuel Capacity Gal

20

Fuel Tanks Capacity

75.71

No of Heads

1

Holding Tank Gal

25

Holding Tanks Capacity

94.64

Num Sleeps

4

Water Capacity Gal

40

Water Tanks Capacity

151.42

ABOUT CUSTOM-BOATS OUYANG BOAT WORKS ALOHA 30

The Custom-Boats Ouyang Boat Works Aloha 30 is 30 feet long that boasts a 11 feet beam and can hold up to 20 gallons of fuel and 40 gallons of water. This 1986 diesel Custom-Boats Ouyang Boat Works Aloha 30 powered by Westerbeke W-13 2 Cylinder with 13.00 horsepower. The Custom-Boats Ouyang Boat Works Aloha 30 is made of fiberglass.