Search Similar
  1. Home

Boats similar to Prototype Mini Transat 6.50

Boat not available.

Prototype Mini Transat 6.50 for sale in Los Angeles, CA United States of America

LOCATION

Los Angeles, CA United States of America

YEAR

2007

LENGTH

21.33 ft.

DETAILS

Condition

Used

Name

Biohazard

Year

2007

Make & Model

Prototype Mini Transat 6.50

Boat type

Sail

Length

21.33 ft.

Fuel Type

Other

Location

Los Angeles, CA United States of America

MEASUREMENTS

Beam

10.01 ft.

Draft Max

6.43 ft.

LWL

21.33 ft.

DESCRIPTION

Designed by Pierre Roland. Built in the USA by D.Wood, this prototype Mini 6.50 has less than 3,000nm under its keel. "Biohazard" is completely build out of carbon fiber and optimized with amazing design features such as a canting keel, water ballasts, outriggers, centerboard, twin rudders, a 12 foot bowsprit and a planning hull powered up by a 40 foot carbon mast. The boat is fully equipped with new or less than 2 years old running rigging. Electrical is new as well with full a Victron Lithium battery and BMS, 2 solar panels and fuel cell. The boat comes with 11 sails (see inventory below).

Well known Mini 6.50s/Open 5.70s builder and offshore racer, Jerome Sammarcelli, purchased the boat in 2015 and completely refitted it. The boat has been meticulously maintained and is fully equipped for offshore racing. In 2016, the boat has always finished on the podium, and also won the well known "Bishop Rock Race", a 200nm singlehanded race to Cortez Bank. In 2017, Biohazard won the overall trophy of the Pacific Singlehanded Sailing Association Dave Wall Series. Biohazard remains the smallest boat on the race course but is always one of the first to finish! Biohazard is ready for some serious offshore sailing and completely optimized for singlehanded or double handed sailing. Of course, you can always participate to regular buoy and coastal point to point races.

Under PHRF Southern California, the boat rates 140 (buoy), 123 (RLC) and 120 (OWC).

A recent survey (April 2016) established the replacement value of Biohazard at $120,000. The boat is priced to sell.

Description And Complete Equipment

HULL, DECK, KEEL, RUDDERS AND DAGGABOARD.

Carbon composite cored FRP Hull and Deck

Primer epoxy barrier under waterline - newly sprayed in Summer 2015

Citrus Green Awlcraft Paint on Keel, centerboard, rudders and accents on deck (roof, toe rails, hatches,…) - newly sprayed in Summer 2015

White Alwcraft paint on hull and non-nonskid - newly sprayed in Summer 2015. 

Light Grey Alwcraft Non-skid on deck - newly sprayed in Summer 2015

RUNNING RIGGING - ALL NEW MARLOW ROPES 2016

Complete set of halyards - masthead spinnaker, fractional spinnaker, main sail and jib.

Complete kit for running rigging on deck - including sheets for spinnaker and genoae.

Additional Reefing kit for genoa - including tack line, reefing sheets, and low friction rings

Additional Vertical bowsprit adjustment

Halyard Snuffers - to keep halyards out of sun

Rope Clutches Upgrade - 12 new Constrictor® textile rope clutches.

SPARS AND STANDING RIGGING

Forespar Carbon Mast - includes VHF antenna, wind indicator, Lopolight LED tricolor light and NKE Wind transducer.

Carbon Boom - includes 3 shelves for reefing and outhaul.

Carbon Bowsprit - 12 feet long, reinforced for Code 0 attachment and adjustable bobstay from cockpit.

Running Backstays - 3 levels: masthead, main hound and baby stay. All Dyneema and adjustable on deck - All new 2018.

Headstay and Shrouds - All Dyneema DM20 Max from Marlow Ropes. All custom lashing at deck and spreaders level - All new 2016. Additional Dyneema Chafe cover in 2018.

Babystay - adjustable from cockpit with 4:1 purchase - New 2018.

SAILS

Square Top Main - Pentex Laminate - 3 reefs - good condition. 
Jib - Pentex Laminate, with 2 reefs - good condition.
A2 - New UK Sailmakers Masthead Asymmetrical Spinnaker, light 0.75oz
A3 - Masthead Asymmetrical Spinnaker, light 0.75oz 
A5 - Fractional Asymmetrical Spinnaker, heavy - 1.3oz
Code 0 - Racing Laminate Genaker, Vectran Rope Luff (includes Karver Code 0 Furling Kit with continuous furling line).
Storm Jib and Stay Sail - orange Dacron, 8.3oz.

Also additional practice sails, all by All Purpose, in good condition:

A2 - Masthead Asymmetrical Spinnaker, light 0.75oz
A3 - Masthead Asymmetrical Spinnaker, light 0.90oz 
A5 - Fractional Asymmetrical Spinnaker, heavy - 1.3oz 

ELECTRONICS

NKE Package with Autopilot - completed serviced, updated with latest firmwares by S A I L U T I O N S and NKE France

  • Depth Sensor
  • Ultrasonic Speed Sensor
  • Mast Head Unit Wind Speed / Direction Sensor
  • GyroComputer 2 Autopilot
  • Gyrographic Display - mounted on articulated bracket down below.
  • Multigraphic Color Display - mounted on custom articulating carbon bracket in the cockpit.
  • True Wind / SOG Gyropilot Upgrade
  • Gyropilot Wireless Remote Package
  • NKE Compass

1 x Bearing Compass with sun cover.

VHF - Standard Horizon PHANTOM Series PS1000 with external mic in cockpit. Connected via NMEA for GPS input for DSC Calls.

RC 10 AIS receiver - with separate antenna, wired via NMEA to NKE Topline bus and displayed on NKE Multigraphic and available to computer navigation software.

3' VHF Mast Head Antenna. Cable and connectors new 2018.

Mast Head Tri Color Lopolight LED Navigation Light - with light sensor for automatic on/off operation.

MerVeille Radar Detector 

ELECTRICAL - all brand new wiring 2016

  • 2 x 6 BlueSea waterproof switches, red/white cabin light
  • Carbon Fiber custom hinged battery box.
  • 1 x Victron Lion Lithium 12V Battery 90 Ah with BMS.
  • 2 x 12V Power adapter plugs
  • 1 x Victron BMV702 Energy Precision Battery Monitor

POWER - all brand new wiring 2016

  • 2 x 50 Watts Flexible Solar Panel - with Victron MPPT Charge Controller.
  • Efoy Fuel Cell with 10L fuel cartridge.

HARDWARE & ADDITIONAL ACCESSORIES 

  • Equipped with Harken, Antal and Carver and Ino-Blocks
  • 95% of stainless pad-eyes and attachments replaced with Custom Soft Pad-eyes
  • Harken Low Friction Rings Upgrade
  • 3 x Antal 16.2 Self Tailing Winches
  • 12 x Constrictors® Rope Clutches - New textile rope clutches featuring less abrasion and more control of halyards and guys.
  • 2 x New Spinlock XAS0408 for the running backstays.
  • Dyneema Life lines with Dyneema Chafe Cover.
  • Outboard Brackets - transom mounted with outside and inside G-10 compression plates
  • Rope Bags by Outils Ocean - brand new indown below, 4 in cockpit)
  • Vertical Bowsprit Adjuster
  • 1 x Spinlock Tiller Extension - with Handle Grip and Diabolo.
  • 1 x Winch Handle Pocket - mounted by companion way.
  • 1 x Custom Canvas Cover - UV / rain tent covers the boat from bow to stern (over boom)
  • Mercury 3.5HP Outboard Motor, Long shaft with modified fuel pump to run the outboard with external fuel tank.

INTERIOR ACCESSORIES

Interior Canvas and Storage

  • Storage pockets with windows inside roof
  • 2 x Cabin Lights- red / white LED light

TRAILER AND ACCESSORIES

Double Axle Road Trailer

  • custom padded fiberglass cradles
  • Spreader bar with lifting gear for crane launching
  • running lights
  • tie-down straps

PROPULSION

Engine Count

1

Engine Horse Power

3.5

ADDITIONAL INFORMATION

HULL

Ballast

430.91

Designer

Pierre Roland

Hull Material

Composite

Hull Type

Monohull

OTHER

Bridge Clearance

12.19 meters

Length on Deck

6.5 meters

Displacement(kgs)

997.9 kilograms

Dry Weight

929.86 kilograms

Engine Year

2014

Engine Type

Outboard 4 Stroke

Keel Type

Canting Keel

ABOUT PROTOTYPE MINI TRANSAT 6.50

The Prototype Mini Transat 6.50 is 21 feet long that boasts a 10 feet beam and a draft of 1.96 meters. This 2007 other Prototype Mini Transat 6.50 powered by Mercury 3.5 with 3.5 horsepower. The Prototype Mini Transat 6.50 is made of composite.

SIMILAR LOCATIONS