This Donovan one design sportsboat was built by Wraceboats in 2016 and has been regularly sailed on the inshore circuit here in Hong Kong. Famed for exceptional speed and control this race boat has gained huge praise from her winning crews and skippers alike. The GP26’s main features are her stable and balanced hull form coupled with the deep fin and 47% balance ratio producing blistering performance. This example comes equipped with a suit of Quantum sails and is ready to race again in Hong Kong or be packed up and shipped to a new destination for a new adventure
DimensionsLOA: 26 ft 0 in
Beam: 8 ft 4 in
Maximum Draft: 6 ft 4 in
Displacement: 1050 kgs
EnginesTotal Power: 2.24 KW
Engine 1:
Engine Brand: ePropulsion
Year Built: 2016
Engine/Fuel Type: Diesel
Engine Power: 2 KW
Electronic & Navigation: - 12v control panel, 12v/24Ah battery with battery box
Interior Equipment: - Manual bilge pump BP9013 Gusher Urchin
Sails & Rigging Equipment: - Carbon mast, carbon boom, carbon vang and carbon bowsprit built by Pauger Carbon
- Composites. Stainless steel rod shrouds and forestay. Composite topmast runners by BSI, with deflector system, Windex, masthead tri-color navigator light
- Moveable cradle
- Quantum J1
- Quantum J2
- Quantum A2
- Quantum A3
- Quantum Main
Exterior Equipment: - Harken & Spinlock deck hardware per JP Donovan Design LLC Deck Layout
- Lewmar foredeck hatch
- Stainless steel stanchions; bow pulpit and stern pushpits. Upper and lower stainless steel lifelines
Specification: - Hull, deck, bulkheads and internal structures constructed with vacuum molded E-glass, epoxy resin and closed cell foam cores. Construction system utilizes separate vacuum procedures for outer hull and deck laminates, core bonding, inner hull and deck laminates and reinforcements to insure the highest quality laminates, core bonds and resin content control.
- Meets with EC Directive 94/25/EC, EC Design Category C, Module A, and Offhsore Special Regulations Category 4 (When Buyer's safety equipment is added).
- Carbon reinforced keel support structure integrated composite shroud chainplates
- Carbon composite rudder blade and stock with upper & lower bearings, carbon tiller.
- Carbon composite keel fin, fixed configuration with simple removal for transport/service.
- Solid cast lead bulb pinned and bonded to keel fin.
- Standard hull topsides gelcoat finish
- Boat bottom, below the chine Race Finish: 1-Barrier Coat, 2-High Build Epoxy 3- Epoxy Primer Paint sanded to 600 grit. NO GELCOAT below chine
- Standard deck gelcoated shiny surfaces and semi-gloss white Polyurethane non-skid.
- Interior middle painted in semi-gloss PU finish
- Open racing interior with two molded berths under cockpit sides.
- Composite Cradle Saddles, one moveable cradle