Nautor Swan Sailboats 46-057 for sale in Phuket Thailand

Maija is a rare “scheel keel” version of the Swan 46 with a two companionway, three stateroom layout.. The aft stateroom has a centerline queen-size berth and ensuite head. She has been systematically restored over the past 2-years and looks like a new boat with original gel coat.

This clasic Swan 46 was originally purchased by a Finnish owner and soon resold to a German who kept her in Spain. Over the past 20-years, she was lightly used and never raced.

Maija is a rare “scheel keel” version of the Swan 46 with a two companionway, three stateroom layout.. The aft stateroom has a centerline queen-size berth and ensuite head. She has been systematically restored over the past 2-years and looks like a new boat with original gel coat.

This clasic Swan 46 was originally purchased by a Finnish owner and soon resold to a German who kept her in Spain. Over the past 20-years, she was lightly used and never raced.

Maija has been constantly upgraded since he purchased her.

Under this ownership, Maija's teak decks were replaced, new leather upholstery for interior, new rod rigging (done in Mallorca); Reckman furling units serviced/rebuilt; Navtec ram & control unit rebuilt; New sails (Rolly Tasker), and spars removed & repainted & serviced. New bimini for rear cockpit and new sprayhoods. Lofrans windlass rebuilt & repainted and chained regalvanized. Baby blake heads disassembled, chromed and rebuilt. New(as original) running lights. Bottom was stripped and epoxy barrier applied. 2017 engine rebuild.

General

The Swan 46 is well-known as a successful cruiser/racer and won the prestigious Rolex Swan European Regatta in 1992 and the Rolex Swan World Cup in 1990, the ultimate test for all Swan models.  
General details:
Model:        Swan 46
Date build:    1987
Builder:    Nautor’s Swan
Designer:     German Frers
Dimensions:
LOA: 14.36m            Beam: 4.41m         Displacement: 14,200 kg
Draft: 1.75m(scheel keel)    Ballast: 5,200 kg        LWL: 11.55m
Engines:
Mfgr: Perkins            HP: 46 Hp            Model: 4.154M
Tankage:
Fuel: 375 liters        Water: 480 liters
Accomodation:
Teak interior, sleeps six guests in three cabins (two upper/lower bedded cabins) forward sharing one head and aft owner’s cabin with ensuite head. Blake manual toilets.
New leather upholstery in main salon and new Sunbrella upholstery fabric in other areas.
Galley:
Double sink, Mobilife three-burner gas range & oven, fridge & freezer
Plumbing & Electrical
Automatic electric bilge pump & two manual bilge pumps
Pressurized fresh water system
Dual water heating - diesel engine and 220 volt hotwater system
Communication & Navigation Equipment
Suunto compass at steering pedestal
Ray Marine C120 plotter, GPS & radar
Ray Marine ST-60 wind & wind, speed & depth instruments in aft cockpit & at chart table
Ray Marine VHF in cockpit and at chart table
Autohelm 6000 autopilot
Winches – Lewmar
2 x 65 Genoa sheets
2 x 55 Mainsheet
2 x 46 Mainsheet traveler
2 x 46 Aft cockpit
2 x 46 Halyards
2 x 52 Halyards
Rigging & Sails
Sloop rig, mast w/three spreaders
Rod rigging
Rechmann manual genoa furling system
Rechmann hydraulic main sail furling
Navtec hydraulic backstay & boomvang adjuster
Two spinnaker poles
One jockey pole
Assorted sails (genoa, stowaway main & staysail)
Deck Equipment
Lofrans Falkon electric windlass
45 lb CQR anchor with chain
Two spray hoods & bimini
Folding table for aft cockpit
Stainless steel pulpit/pushpit and stanchions
Tender, Safety & Security Equipment
Achilles tender with soft bottom & 3 HP Yamaha outboard
BFA Liferaft
Two horseshoe life rings
Folding stern bathing ladder

Comments

2017 UPGRADES:

Hull sanded and epoxy barrier coated 2017

Engine Rebuilt 2017 including:

New engine mounts and alignment

New fresh water pump

Injection pump complete rebuilt including sand blasted case 

Injector nozzles replaced and injectors serviced

New injector fuel lines

Valve cover, intake manifold and misc brackets chromed

Head and various components primed & painted

Heat exchanger anodized and new rubber end caps

Heat exchanger core pressure tested and serviced

Oil cooler cleaned, painted and serviced

Cylinder head resurfaced

Valve guides and seals replaced

Valves lapped

All new gaskets and seals on head, heat exchanger and intake manifold

All new rubber hoses for coolant (6)

All new high-pressure oil lines (4)

Both alternators removed and serviced

New thermostat

Engine flushed and new coolant

All new drive belts

Gear box oil replaced.

New onboard computer & entertainment system 2017

New cutlass bearings and stuffing box hose 2017