Search Similar
  1. Home

Boats similar to Custom Steel Cutter

boat-cover

58.01 ft.

|

2006

San Diego, California

Seattle Yachts

boat-cover

50.0 ft.

|

2006

Marina Del Rey CA

Denison Yacht Sales

boat-cover

48.0 ft.

|

2005

Redwood City, California

Seattle Yachts

boat-cover

48.0 ft.

|

2005

Redwood City CA

Seattle Yachts

boat-cover

39.99 ft.

|

2005

Bradenton, FL

Denison Yacht Sales

boat-cover

48.0 ft.

|

2007

Anacortes, Washington

Seattle Yachts

boat-cover

31.99 ft.

|

2007

Richmond, California

Seattle Yachts

boat-cover

24.84 ft.

|

2005

Port Royal, South Carolina

Brewer Yacht Sales

View more similar boats Arrow

Boat not available.

Custom Steel Cutter for sale in San Diego, CA United States of America

LOCATION

San Diego, CA United States of America

YEAR

2006

LENGTH

54.0 ft.

DETAILS

Condition

Used

Name

Eva G

Year

2006

Make & Model

Custom Steel Cutter

Boat type

Sail

Length

54.0 ft.

Fuel Type

Diesel

Location

San Diego, CA United States of America

MEASUREMENTS

Beam

16.5 ft.

Cabins

2

Draft

8.33 ft.

Fresh Water Tanks

4 (50 Gallons)

DESCRIPTION


PEACE OF MIND IS WHAT EVA G WILL GIVE YOU! BUILT TO THE HIGHEST STANDARDS WITH SAFETY AND COMFORT RARELY FOUND IN A VESSEL SO REASONABLY PRICED.

SHE IS SPACIOUS YET SIMPLE TO HANDLE AND HAS BEEN LOVINGLY CARED FOR SO IS READY TO CROSS OCEANS OR BAYS.

DONT WAIT TO FIND YOUR PEACE OF MIND NOW!

We Sailed Eva G on 02/20/21 here in San Diego and I was very impressed with the handling while getting on and off the dock and was pleasantly surprised to see a maintained 6 knots in 10-11 knots of breeze with all three sails out! We sailed for several hours and found the cockpit to be large and comfortable while the side decks, bow and stern areas had lots of room to safely move around the deck and allow easy access to all systems.

Photos underway were taken 02/20/21

WAS $449K, NOW ONLY $399K!

"EVA G" is a phenomenally well built, take you anywhere kind of yacht. This steel cutter was built to very high standards in British Columbia and will provide a comfortable ride no matter what the weather. Add to that, the hull is virtually impenetrable.

"EVA G" is set up for short handed sailing while also providing ample room for friends and family whether join you on the longer legs or in a secluded and quiet anchorage.

This substantial yacht sports a modified full keel and skeg-hung rudder, providing superior handling without compromising the ride or safety at sea.

Sadly, the owner is selling due to health reasons, so offers are HIGHLY encouraged!

Please call or email the listing broker anytime, to make the "EVA G" your now! You will not be disappointed.


Boat Name
Eva G
Specs
Builder: Nanoose Boat Works
Designer: Bruce Roberts
Flag of Registry: United States
Keel: Fin
Hull Shape: Displacement
Dimensions
LOA: 54 ft 0 in
Beam: 16 ft 6 in
Maximum Draft: 8 ft 4 in
Displacement: 72000 lbs
Engines
Total Power: 80 HP
Engine 1:
Engine Brand: Cummins
Year Built: 2006
Engine Model: 3.9 4BT
Engine Type: Inboard
Engine/Fuel Type: Diesel
Location: Center
Engine Hours: 750
Propeller: 3 blade propeller
Drive Type: Direct Drive
Engine Power: 80 HP
Tanks
Fresh Water Tanks: 4 (50 Gallons)
Fuel Tanks: 4 (100 Gallons)
Holding Tanks: 1 (80 Gallons)
Accommodations
Number of double berths: 2
Number of cabins: 2
Number of heads: 2
Electronics
Depthsounder
Log-speedometer
Navigation center
Plotter
Autopilot
Compass
GPS
VHF
Radar
Radio
Sails
Furling mainsail
Furling genoa
Storm jib
Rigging
Steering wheel
Electric winch
Spinnaker pole
Inside Equipment
Electric bilge pump
Manual bilge pump
Battery charger
Hot water
Fresh water maker
Oven
Microwave oven
Marine head
Refrigerator
Deep freezer
Electrical Equipment
Shore power inlet
Generator
Inverter
Electrical Circuit: 12V
Outside Equipment/Extras
Solar panel
Cockpit cushions
Cockpit table
Swimming ladder
Davits
Liferaft
Total Liferaft Capacity: 8
Electric windlass
Covers
Bimini Top
Mainsail cover
Cockpit cover
Genoa cover
Spray hood
Construction
  • Hull: Welded 1/4" & 3/16 steel plate
  • Bilge Stringers: 1.25" x 0.25" on 16" centers
  • Decks: Welded 3/16" steel plate, painted
  • Fastenings: stainless steel and welds

Mechanical

Engine: Cummins 3.9 4BT 80HP diesel

  • Hours: 750
  • Cooling: Fresh water
  • Transmission: 2:1 Twin Disc
  • Propeller: 3-blade
  • Alternator: 160Amps

Genset: Apollo Kubota DC Generator

  • Fuel: Diesel
  • Voltage/Amps: 12VDC up to 160 Amps

Rigging
  • Aluminum mast w/double spreaders
  • SS standing rigging
  • Forespar Leisure-furl Boomer furler
  • Forespar rigid boom vang
  • Harken genoa and staysail furlers
  • Winches: All Harken ST's, 1x56.3, 2x44-2 speed, 2x #10-2 speed, 1x 48-2 speed, 1x 48-2 speed on mast, 2x 46-2 speed, 2x #16 for traveler.
  • Harken main traveler.

Tankage

Fuel Tanks

  • 2x steel in keel
  • 2x SS wing tanks

Water Tanks

  • 4, total 200 gallons
  • 1x Isotemp, 10 gallon SS hot water tank

Galley
  • Double SS sink
  • Princess 3-burner stove w/oven. Propane
  • Frigoboat refer and freezer
  • Windchaser ice-maker
  • Oster microwave
  • Ample storage

Electronics/Navigation
  • 2x Raymarine RL80c Radar/Chart plotters
  • 2x Icom and 1x west marine VHF's
  • 2x Raymarine Tri-Data displays
  • Comnav autopilot
  • Magnum Pure sine wave 2800 Charger/Inverter (new in Feb 2020)
  • Ritchie compass at helm
  • Barometer
  • Satellite receiver
  • 30 Amp shore power
  • 3x solar panels w/controller

On-Deck
  • SS Bow and stern pulpits
  • Lifelines
  • SS deck cleats
  • 6x on-deck hatches
  • Anchors: 1x 110lb Bruce, 1x Danforth
  • Nilsson NZ-12VDC Anchor windlass
  • Spinnaker/whisker pole
  • Iversen's Canvas Dodger, Bimini and side-screens
  • SS destroyer-style wheel
  • Edson pedestal w/cable steering
  • zodiac 8-person liferaft (needs service)

Additional Equipment
  • Hurricane diesel water heater
  • Horizon Seafari watermaker
  • Water, diesel and gas cans
  • Fenders
  • Docklines
2725 Shelter Island Drive
San Diego, CA 92106 United States
Toll-free
Tel
Email Us

PROPULSION

Engine Count

1

Engine Horse Power

80 HP

Engine Hours

750

Engine Location

Center

ADDITIONAL INFORMATION

HULL

Designer

Bruce Roberts

Hull Material

Steel

Hull Shape

Displacement

ELECTRICAL EQUIPMENT

Holding Tanks

1 (80 Gallons)

OTHER

Double Berths

2

Builder

Nanoose Boat Works

Country Built

United States

Displacement(kgs)

72000 lbs

Electrical Circuit

12V

Engine Year

2006

Engine Type

Inboard

Fuel Tanks

4 (100 Gallons)

No of Heads

2

Keel

Fin

Life Raft Capacity

8

Propeller

3 blade propeller

ABOUT CUSTOM STEEL CUTTER

The Custom Steel Cutter is 54 feet long that boasts a 17 feet beam. This 2006 diesel Custom Steel Cutter powered by Cummins 3.9 4BT with 80 HP horsepower. The Custom Steel Cutter is made of steel. This vessel comes equipped with holding tanks .

SIMILAR LOCATIONS