$590,000
LENGTH:
80.7 ft.
|
YEAR:
1993
LOCATION:
Willemstad
OFFERED BY:
Yacht Broker Caribbean BV
$608,300
LENGTH:
77.1 ft.
|
YEAR:
1994
LOCATION:
Costa Blanca
OFFERED BY:
De Valk Yacht Brokers
LENGTH:
75.0 ft.
|
YEAR:
1995
LOCATION:
Turkey
OFFERED BY:
Simpson Marine Limited
$607,084
LENGTH:
71.0 ft.
|
YEAR:
1972
LOCATION:
Portugal
OFFERED BY:
De Valk Yacht Brokers
Boat not available.
LOCATION
Grenada
YEAR
1984
LENGTH
75.98 ft.
Condition
Used
Name
Serenite
Year
1984
Make & Model
Ron Holland Cruising Cutter
Boat type
Sail
Length
75.98 ft.
Fuel Type
Diesel
Location
Grenada
Beam
18.5 ft.
Cabins
4
Draft Max
7.51 ft.
This Ron Holland Cruising cutter is powered by a 6 cylinder MWM ATM diesel engine with direct drive.
Serenite also features a 16W Onan generator, Sea Recovery watermaker 220v 130l/h, 2x 220v compressors and air conditioning throughout.
This Ron Holland cutter features all North Sail Spectra sails and an Incidence Sails gennaker. She has aluminium spars and a keel stepped mast.
This Ron Holland cruising cutter provides a master and two guest cabins each with en suite bathroom, as well as crew accommodation
The master cabin to aft features a large centreline double bed, sofa area, dressing area and an ensuite bathroom with separate shower compartment.
Two guest cabins are found at midships, they include pullman berths and an ensuite bathroom each.
Crew quarters are located forward with a cabin and ensuite bathroom, the crew quarters can be accessed directly from the deck.
The open-plan saloon area of this Ron Holland cutter provides a sofa-seating area to port and a dining area to starboard with large dining table and a wrap around sofa provides seating for all guests.
There is also a navigation station to port with chart table and instruments.
The U-shaped galley is located aft of the saloon and is well equipped with a 4-burner gas oven, 2x freezers, 2x refrigerators (600l total storage), dishwasher, double sinks and Corian work surfaces.
This Ron Holland Cruising cutter is powered by a 6 cylinder MWM ATM diesel engine with direct drive.
Serenite also features a 16W Onan generator, Sea Recovery watermaker 220v 130l/h, 2x 220v compressors and air conditioning throughout.
This Ron Holland cutter features all North Sail Spectra sails and an Incidence Sails gennaker. She has aluminium spars and a keel stepped mast.
This Ron Holland cruising cutter provides a master and two guest cabins each with en suite bathroom, as well as crew accommodation
The master cabin to aft features a large centreline double bed, sofa area, dressing area and an ensuite bathroom with separate shower compartment.
Two guest cabins are found at midships, they include pullman berths and an ensuite bathroom each.
Crew quarters are located forward with a cabin and ensuite bathroom, the crew quarters can be accessed directly from the deck.
The open-plan saloon area of this Ron Holland cutter provides a sofa-seating area to port and a dining area to starboard with large dining table and a wrap around sofa provides seating for all guests.
There is also a navigation station to port with chart table and instruments.
The U-shaped galley is located aft of the saloon and is well equipped with a 4-burner gas oven, 2x freezers, 2x refrigerators (600l total storage), dishwasher, double sinks and Corian work surfaces.
The navigation and electrical equipment on board this Ron Holland cruiser, includes:
Engine Count
1
Propeller Type
3 Blade
HULL
Designer
Ron Holland
Hull Material
Aluminum
OTHER
Bathrooms
4
Drive Transmission Description
Other
Drive Up
2.26 meters
Engine Year
1984
Engine Type
Inboard
Fuel Tanks Capacity
4000 liters
No of Heads
4
Water Tanks Capacity
4000 liters
The Ron Holland Cruising Cutter is 76 feet long that boasts a 19 feet beam and a draft of 2.29 meters. This 1984 diesel Ron Holland Cruising Cutter powered by MWM ATM 6 Cylinder. The Ron Holland Cruising Cutter is made of aluminum.