Search Similar
  1. Home

Boats similar to Zodiac Boats 650 Pro

boat-cover

22.01 ft.

|

2000

Portugal

Volante Yachts

boat-cover

23.79 ft.

|

2000

St Helier, JE

PC Boat Sales Ltd

boat-cover

20.01 ft.

|

2009

Chichester

Network Yacht Brokers

boat-cover

23.62 ft.

|

2012

Belgium

Brugge Marine Center

boat-cover

19.69 ft.

|

2015

Thailand

Simpson Marine Limited

boat-cover

20.08 ft.

|

2022

Bray

Bray Marine Sales

Boat not available.

Zodiac Boats 650 Pro for sale in Poole E12 United Kingdom

LOCATION

Poole E12 United Kingdom

YEAR

2002

LENGTH

21.33 ft.

DETAILS

Condition

Used

Year

2002

Make & Model

Zodiac Boats 650 Pro

Boat type

Power

Length

21.33 ft.

Fuel Type

Petrol

Location

Poole E12 United Kingdom

MEASUREMENTS

Beam

8.2 ft.

DESCRIPTION

Fabulous ZODIAC PRO 650 RIB rigid inflatable boat vessel with nearly new 2019 low hours Mercury Command Thrust T 115HP four-stroke engine (still in warranty). This boat is configured with foredeck sun lounger pad, offset console with protective screen, double width bolster seat and full-width bench seat aft. The boat had rod-holders and a ski tow pole. The boat also benefits from having a Garmin 7" GPS plotter, fishfinder and fixed VHF radio. Underneath the rear bench seat the boat is fitted with a large capacity Igloo cooler.

The engine is a 2019 Mercury Command Thrust four-stroke 115bhp still in warranty.

The boat is fitted with teak decking throughout.

She has never been anti-fouled.

The Zodiac had a new full boat cover.

Presently she sits on her own Tetra-dock keeping her safely out of the water. This dock is available by separate negotiation, as is the berth at Emsworth Yacht Harbour which can be made available.

GENERAL

Fabulous ZODIAC PRO 650 RIB vessel with nearly new low hours Mercury GT 115HP four-stroke engine. This boat is configured with foredeck sun lounger pad, offset console with protective screen, double width leaner seat and full-width bench seat aft. The boat had rod-holders and a ski tow pole. The boat also benefits from having a Garmin 7" GPS plotter, fish-finder and fixed VHF radio. Underneath the rear bench seat the boat is fitted with a large capacity Igloo cooler.

The boat is fitted with teak decking throughout.

She has never been anti-fouled.

The Zodiac had a new full boat cover.

Presently she sits on her own Tetra-dock keeping her safely out of the water. This dock is available by separate negotiation, as is the berth at Emsworth which can be made available.

MERCURY 115HP COMMAND THRUST FOUR-STROKE ENGINE

Fabulously, this boat is fitted with a 2019, effectively new Mercury Command Thrust 115hp four-stroke engine, with two years of transferable warranty remaining. The engine was serviced recently and has a smart branded outboard cover to protect it both when in use and at rest.

The engine is Mercury Command Thrust model. Mercury Marine, the manufacturer states that their CT models provide:

Key points

  • Larger gearcase, larger diameter propeller, more propellers to choose from.
  • Produces more lift, better acceleration, improved manoeuvrability and added durability.
  • Ideally suited to deep vee hulls such as found on the Zodiac 650 Pro.

What is Command Thrust?

Mercury Command Thrust is a range of Mercury outboards that have been introduced with larger gear cases, longer props, and larger gear ratios. This results in more lift, better acceleration, improved handling and added durability. Superb power to weight relationship means vastly better fuel economy without sacrificing performance.

The 115HP is the largest flagship model of the Mercury CT range of outboards.

Larger gear case

Delivering more for less, the larger gears and gear case are designed to handle more thrust. Side-by-side with the standard models, the Command Thrust’s propeller sits lower in the water, essentially also acting as a bigger rudder that provides more leverage to control the boat.

Wider propeller diameter

The propeller on Command Thrust models has 20% more surface area than the standard propellers.

Benefits of Command Thrust models

More lift:

Heavy or fully loaded boats can be more easily lifted out of the water with the extra thrust of a wider propeller, helping you get on the plane faster.

Plane at lower speeds:

Once you’re on the plane, the Command Thrust models can also keep you on the plane at lower speeds. Being on the plane means more of the boat is out of the water and the boat has less drag, which means better fuel economy and cost savings for you.

Better acceleration:

More surface area on the propeller provides more thrust and better acceleration. Plus, when combined with Mercury’s premium propeller range, you have a combination that puts you ahead of the pack.

Holds better in rough water:

With what is effectively a deeper rudder in the water, the Command Thrust models give you more leverage to control the boat and more authority in any condition.

(information gleaned from Mercury website)

PROPELLOR

The Mercury Command Thrust 115hp engine is fitted is equipped with a three blade 21 pitch stainless steel ‘ENERTIA’ (sic) performance propeller. Mercury state these larger propellers are faster, stronger and more responsive.

HULL

The hull is a deep vee (24 degree deadrise at the transom) giving it the capability to handle rougher seas. It is also reported to give a quieter ride when underway. The hull has never been anti-fouled and is without blemish.

CONSOLE

The console is slightly offset to allow forward/aft movement. The console has a lightly tinted perspex wrap-around screen with a stainless steel tubular handhold surrounding the screen and also running vertically down the front/centre of the screen.

It has a locker door to provide access to storage and a recessed extinguisher holder. The dashboard supports the stainless steel steering wheel and throttle lever. Engine instruments (fuel level, rev. counter and voltmeter gauge) are mounted in the dashboard. The Garmin GPS chart-plotter, Hummingbird fish-finder and Standard Horizon Eclipse are mounted on the dashboard also.

After releasing two over-centre catches the whole console can be tipped forward to access large storage area beneath. The tilting action is also of use if one needs to lower the overall height of the boat for access to storage etc.

DRIVER'S/CO-DRIVER'S BOLSTER SEAT/ROD-HOLDERS

Driver and co-driver are provided with a twin bolster seat which is well-positioned and gives security and support. The rear of the bolster seat has four stainless rod-holders and ample tubular stainless steel handholds. The Igloo cooler can also be moved forward from it's transom stow point and strapped in underneath the bolster seat.

REAR BENCH SEAT

The boat features a three person bench seat with storage lockers beneath as well as a large size Igloo 54 (51 litre) cooler purpose fitted. The bench seat has stainless steel grab handles to the front and sides. A two piece backrest can be removed if required. There are drinks holders mounted in the fibreglass coaming aside each outer seat.

NAVIGATION/ELECTRONICS

The boat is equipped well with:

  • GARMIN GPS 7" chart-plotter mounted on the console
  • HUMMINGBIRD fish-finder mounted on the console
  • STANDARD HORIZON ECLIPSE fixed VHF transceiver radio
  • Navigation lights
DIMENSIONS

The Zodiac 650 Pro is 6.5m long inflated, 4.95m plus engine deflated, 2.5m outer beam inflated with tubes inflated, 1.35m inner beam deflated (will fit into garages).

Console folds forward to approximate level of tubes to allow for storage in places with lower headroom.

BOAT WEIGHT

Weight is 670kg without engine, 830kg with engine. Easy to tow, manoeuvre, launch & retrieve, even solo.

FUEL TANK

120 litre underfloor tank providing excellent range.

SKI POLE

The Zodiac 650 Pro is fitted with a tube braced stainless-steel ski pole for pulling skiers or inflatable watercraft. This can be stored under the tilting console when not required.

REMOVEABLE SUNDECK

Forward there is a full width fill-in sundeck in cream upholstery. When not required this can be taken down and stored within the tilting console storage area.

TEAK DECK

Luxurious & grippy underfoot, Seadeck synthetic teak deck is fitted throughout the boat.

PULPIT/FORWARD ANCHOR LOCKER

Forwards, there is an anchor locker which also provides a seat. For security surrounding the pulpit is a stainless pulpit rail. At the bow there is a reinforced bow fitting with bow roller. Navigation lights are fitted to the pulpit rail.

RUBBING STRAKE

The Zodiac is fitted with a robust three-level rubbing strake to provide the boat with tough protection when alongside pontoons or other boats. The boat is also equipped with curved RIB fenders to protect the boat further.

TETRADOCK and BERTH

When at her berth at Emsworth the Zodiac sits atop a floating Tetradock keeping the boat out of the water when at rest negating the need for anti-foul and keeping her away from the harmful effects of seawater. The Tetradock and berth are available under separate negotiation.

DisclaimerThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

ADDITIONAL INFORMATION

HULL

Hull Material

fiberglass

Hull Shape

deep-vee

OTHER

Fuel Tanks Capacity

31.7 gal

ABOUT ZODIAC BOATS 650 PRO

The Zodiac Boats 650 Pro is a 21 feet long that boasts a 8.2 feet beam. The Zodiac Boats 650 Pro is made of fiberglass.