- Boat Type
- $59,000 (£45,930)
- RB Ref
- Tax Status
- Tax Unpaid
- Grenada W.I., Grenada W.I.
- United Kingdom
Get an instant finance quote for this boat - click here
About this Ted Brewer 46
MAJOR PRICE REDUCTION : Sogno II was a custom designed flush-deck pilothouse cutter for businessman/sailor Reese Palley by Ted Brewer. Mr. Palley then hired Robert Pancoe to build the boat (dubbed an Oceanic 46 by the architect) in Taiwan. Mr. Pancoe went to Mao-Tai shipyard to have the vessel built and after the start of construction the decision was made to build several Oceanic 46’s and Pan Oceanic Marine was started with Sogno (launched “Unlikely VII”) becoming hull # 1. After her launch, Sogno was sailed extensively throughout the world. Her current owner purchased her in 2007 and has sailed her throughout the Caribbean and Mediterranean doing several transatlantic crossings and visiting Central America and the southern part of the United States. During this time, Sogno underwent several refits and many upgrades. The owner reports that although she appears to be a heavy boat, she is very responsive in light airs and, with a medium displacement hull, sizeable keel and low center of gravity, she also copes well with stronger winds and rougher seas. She is spacious and comfortable, with lots of deck space, an ergonomic cockpit, and a large saloon. Due to a change in career plans, the owner has decided that he will not have the time necessary to keep Sogno II in the condition he wants and thus she is now on the market. A very special boat indeed looking for yet more adventure
Viewing by appointment at our Grenada Office.
The layout offers up to seven berths. There is full standing headroom and good ventilation throughout. Interior upholstery replaced in 2015. In forecabin, large Pullman berth to port with plenty of storage, hanging locker and 2 opening bronze port lights. Large Newmar deck hatch and access to the chain locker. Aft to port is the head with shower and marine toilet. To starboard is a vanity with s/s sink, Corian countertop and storage lockers. Both the head and the vanity have pressurized hot & cold water. Working aft is the saloon with a dinette to port with fore and aft bench seats and 3 crew births. There are 4 opening bronze port lights, a deck hatch and ample storage throughout including a pantry and Newport Dickinson diesel cabin heater. This is followed by the galley to port with a ‘pass through’ window to the dinette, s/s sink with hot, cold, and raw water outlets, a drinking water faucet with reverse osmosis filtration. The cooker is a gimballed, 3 burner, Force 10 with oven and broiler; there are two top loading iceboxes each with its own cooling system and an abundance of storage. Up-step to the pilot house with a navigation table to port and a U-shaped dining area to starboard. Outboard of the navigation table is an extensive electrical panel. The pilot house inside steering system has been removed, but the connections remain so that one could be reinstalled. Companionway ladder to cockpit adjacent down-step to the owners cabin with a double berth to port, large Lewmar hatch for ventilation, hanging locker and extensive storage areas, and the head to starboard with Corian countertops, shower, marine toilet and plenty of cabinet storage.
Located centrally under the pilot house is the Perkins 4-154, 4-cylinder, freshwater cooled marine diesel (approximately 4,300 hours). Borg-Warner hydraulic transmission (2:1), shaft drive to 3 blade fixed prop. Cutlass bearing and packing gland serviced 2015. Well maintained; fuel consumption approximately ½ gal./hr. at 1600 rpm which translates into 5 kts. giving Sogno a cruising range of some 2,000 miles. Various engine spares. WAECO Adler Barbour compressor cooler (2008); BoatFrigo cooler unit.
- 3 wet-cell 105 Ah service batteries (2017) + 3 AGM 105 Ah service batteries (2013)
- 70 Amp Alternator charging (2014)
- Air-X 30 Amp wind generator (2008)
- 500w solar system (2016)
- Xantrex 2500W 110 v inverter/charger (2010)
- Xantrex 60 Amp battery charger (2016)
- LED or halogen interior lights throughout
Spars & Sails
Masthead cutter rigged. Keel-stepped aluminum mast (Isomat) with double set of spreaders. Aluminum boom with quick reefing system. Harken MK2 headsail furling system (2014), Norseman terminals. Two Barient 32 primary winches, two Barient 26 secondary winches, five halyard winches on mast.
- Mainsail 9.4 oz dacron – Lee Sails - 2016
- Mainsail 9 oz cloth – Lee Sails - 2008
- Furling genoa 7 oz – North Sails - 2008
- Yankee 9 oz – Lee Sails – 2011
- Staysail 9 oz – Lee Sails – 2011
- Radial head drifter 1,5 oz – Lee Sails – 2011
- Jibtop Genoa – backup
- Staysail – backup
- Yankee jib - backup
- Delta 45# anchor with 300 ft. 3/8” chain
- Bruce 45# anchor with 10 ft. ½” chain and 300 ft. 3/8” rode
- Fortress 30# anchor with 300 ft. rode
- Balmar electric windlass with horizontal capstan and gypsy
- Stainless steel pulpit/bow-sprit (2015), pushpit, stanchions and guardwires
- Destroyer leather covered wheel on Edison pedestal
- Bimini (2015)
- Bimini extension/cockpit cover (2015)
- Cockpit table
- Cockpit and deck cushions
- Swim ladder (2016)
- Various warps and fenders
- 2 x Ritchie steering compass
- Furuno radar (2010)
- Standard Horizon GPS chart plotter (2013)
- Standard Horizon Matrix VHF with AIS (2011)
- Standard Horizon tethered handheld VHF Ram (2011)
- AutoNav steer controller with tethered remote control
- Nexus Autopilot (2016)
- Nexus Multi indicator (2016)
- Nexus Wind indicator (2016)
- Laptop with Maxsea navigation & CM93 charts (2010)
- Sony marine radio with tuner, AUX & CD
- ICOM M-34 handheld VHF (2013)
- LED navigation lights
- Fire extinguishers
- Fire blanket
- Gas alarm
- Cockpit harness eyes
- Radar reflector
- Revere Offshore Extreme 4 person liferaft (2007, last serviced 2014)
- Throwing line
- 2 x automatic, electric bilge pumps
- Emergency tiller
- Various lifejackets and harnesses
- Sundry spares and manuals for equipment
- AB aluminum inflatable dinghy with 8 hp Mercury outboard(2012)
- Cockpit barbecue
Sogno has been a joy to own and sail. She has taken me many thousands of miles and has never let me down. I have consistently upgraded her in an attempt to maintain her legendary pedigree. She is in great condition and ready to go where ever the new owners wish to go.
Built in 1979 by Mao-Tai Shipyard to a Ted Brewer design. White solid GRP hull, teak caprails, white GRP superstructure and stringers cored with Balsa and Airex. Originally teak laid deck on top of 12mm marine plywood (teak removed in 2008 and replaced with 2 layers of fiberglass). Encapsulated keel with rudder hung on modified skeg. Wheel steering, aft self draining cockpit.
As one the UK’s largest Brokers with over 330 boats for sale we are able to introduce you to Boat Insurance providers that offer all types of Boat Insurance including insurance for Yachts, Sailing Boats, Motor Cruisers, Narrowboats, Inland Waterway Craft, Barges, Houseboats, Speedboats, Rigid Inflatable Boats, Waterski Boats, Jet Skis, Personal Watercraft, Dinghies, Fishing Boats, Commercial Boats, Boats in Build or Refit.
Just call us to request an insurance quote for this boat or your current boat.
The company normally acts as brokers for the vendor who unless otherwise stated is not selling in the course of a business. Whilst every care has been taken in the preparation of these particulars the correctness is not guaranteed and they are intended as a guide only and do not constitute a part of any contract. A prospective buyer is strongly advised to check these particulars and where appropriate and at his own expense to employ a qualified marine surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability on our part.
General note on safety equipment: Any safety equipment such as liferaft, fire extinguishers and flares etc., are usually personal to the current owner(s) and if being left on board as part of the sale of a used vessel, may require routine servicing, replacement, or changing to meet a new owner’s specific needs.