Nautor Swan Sailboats 47 for sale in Lagos Portugal

Major refit in 2022/23 - New Engine and Standing Rigging

Over £100,000 spent on maintenance and upgrades

13mm Teak Deck new in 2012

'Chantoosie' (Formerly 'Pulsar II') is an S&S Nautor Swan 47 MK II and was the first hull with the Mk II interior.

Major refit in 2022/23 - New Engine and Standing Rigging

Over £100,000 spent on maintenance and upgrades

13mm Teak Deck new in 2012

'Chantoosie' (Formerly 'Pulsar II') is an S&S Nautor Swan 47 MK II and was the first hull with the Mk II interior. This gives her a larger saloon and slightly smaller aft cabin compared to her earlier sisters with her mast just forward of the saloon table instead of in the middle of the table. She was built in June 1977.

The Sparkman & Stephens Swan 47 is a very powerful sailing yacht with impeccable sea manners and performance, especially upwind. In her current configuration she is easily handled by 2 or more crew.

The current owners purchased the boat in Malta, in 2022 and subsquently refitted the yacht in Malta and Palma before undertaking the ARC. The boat is now enroute to Spain. The refit work included: New Volvo penta engine and gearbox, new standing rigging, new chart plotter, new safety equipmnet, new keel coolers for the fridge and freezer (much more efficient than compressor coolers), new shaft seal, new batteries, sat comms installed to name just a few items.

The previous owners purchased in Palma, Majorca in 2001. She was shipped to the UK via cargo ship and went immediately into a yard for professional work on the hull and the yacht in general. Over the next 2 years she was heavily refitted.

In 2004 the rig was un-stepped, all fittings removed and the aluminium tube painted in white Awlgrip. All mast fittings including the rod kicker were also painted. The mast was re-assembled and re-stepped after all rigging and electrics were checked and replaced as required.

The work was carried out at the Swan service centre, Camper & Nicholsons, Gosport.

Since then she has been continuously updated. In 2012 she had a new 13mm teak deck, new instrumentation including a chart plotter at the helm position in a custom built stainless steel frame, new anchor chain and a new cruising furling genoa in 2014.

The hull is original gel which is in very good condition. The coachroof and cockpit were painted in 2012 with white Awlgrip, 6 coats.

She was very successfully raced in 2003, achieving overall amateur winner of the Swan Europeans and 1st in class in JOG Cat 3 Class 1 summer series.

In 2004 she left the UK and was sailed to the Mediterranean. In 2005 she arrived in Malta and has been based in Malta since that date and has been updated every year with the concept of keeping her as original as is practical.
The boat arrived back in Europe in June 2023 and since then the following works have been undertaken to ensure the boat is ready for use:

Lift, clean, inspection & new antifoul
Gelcoat repairs
Sail service & repairs – Genoa, Stay-Sail and Mainsail
Replacement drive shaft for improved arrangement (replacing two-part shaft with a single new one).
New propeller.
Engine service.
New manual stern bilge pump.

2022 Refit

New safety equipment
New 6 person life raft
New life jackets with harnesses & personal locator beacons
New Epirb
New danbuoy
New flares, etc.
New Volvo Penta engine (now at circa 600 hours)
New gear box & control lever, plus 100 hour service.
New Victron 3kW charger/inverter
New Garmin chart plotter
New keel coolers to fridge & freezer (replacing air heat exchangers & far more effective)
WC pumps serviced / replaced
Replacement shaft seal
Replacement gas pipe to stove
Recently replaced domestic & engine batteries, installation check & wiring updates by Swan International
Sat Comms equipment installed

Construction

Hull, deck and superstructure construction:

The hull is GRP.

The deck is foam-cored GRP sandwich construction but is a single laminate with stainless steel backing plates under the deck fittings.

The side decks, coachroof, bridge deck and cockpit floor and seating are teak covered.

Keel and Rudder:

The ballast keel is a lead/antimony casting with stainless steel shoe and trailing edge.

The rudder is of foam-filled fibre glass, constructed with a high tensile stainless steel stock supported by 2 bearings

Machinery

Engine and gearbox:

Volvo Penta D2-60F (Fitted new in 2022)

Propulsion and steering:

Propeller: 20” 3B RH B-PLUS FeatherStream (2023)

Shaft seal (2022)

Cable operated wheel steering with hide covered stainless steel wheel.

Bow thruster:

Sleipner Side Power SP75T (2003).

Electrical System

Voltage Systems:

12vDC services with 220vAC ring main.

Victron battery monitor BMV-6025

Batteries:

All replaced in 2022

Battery Chargers:

Victron Phoenix Multiplus 12v/3000/120a combined inverter/charger. Powering TV/CD/DVD and other AC devices (2007). (The output is sufficient to run a medium sized microwave oven).

Shore Power:

220v AC Marineco shore power connection with 220vAC sockets in the accommodation.

New 16a shore power cable (November 2022)

Collection of shore power plug adapters.

Plumbing System

Fresh water and water heating System:

12v pressurized hot and cold water system with backup manual footpump system on each outlet.

Hot water heated by engine calorifier or by 220vAC immersion heater in 40litre insulated

hot water tank.

Remote control panel in galley

Manifold system to allow product water to fill any 1 of the 3 water tanks or an external container.

Bilge Pumps:

1 x 12v DC bilge pump in main bilge sump. (Major service 2021)
1 x manual bilge pump situated next to bilge sump under saloon sole.

1 x manual bilge pump situated in rear cockpit locker front to starboard of the helm.

1 x 12v DC emergency bilge pump.

The manual bilge pumps to the saloon & rear cockpit locker were both serviced (new valve caskets & bellows) November 2022

Tankage

Fuel:

Fuel capacity 210 litres in 2 stainless steel tanks

Fresh water:

Fresh water capacity 490 litres in 3 stainless steel tanks.

Grey/black water holding tanks:

2 x grey water tanks for the 2 heads.

1 x Black water tank. (Black water tank not currently connected although the pipework andvalves are all installed).(2009)

Jabsco ITT marine toilets. Pumps changed several times.

Navigation Equipment

In cockpit:

Garmin chart plotter installed in custom built stainless steel frame attached to the steering pedestal. Garmin chart for the whole of the Med. (S.Portugal to all Med. Coastlines, EU/N. Africa/Near Middle East). Original SD card plus a backup/daily use card.

AIS rcvr linked to chart plotter.

Garmin GHC10 Autopilot Display and Control

Whitlock rotary chain drive.

B&G Hercules Autopilot

4 x Garmin GMI 10 display heads displaying all speed,depth,wind and nav data. Data from

B&G sensors on NMEA I/F. In addition data passed to chart plotter.(2012) Danforth

Constellation compass, rebuilt 2004.

At the chart table:

Stand alone GPS, MLR FX312 XC (backup)

ICS Nav6 Plus Navtex

ICS Fax 2 Weather facsimile/Navtex system (not in current use). B&G 1000 display head.

12in LCD screen for PC

Communications equipment:
Icom hand-held VHF radio, M37E, new 2022

Icom VHF Marine IC-M503. (2004)

Other:

Matrix Galley gas alarm.

Domestic Equipment

Galley:

Force 10 stainless steel gas cooker with 3 burners and oven. (2010)

2 x large Camping Gaz bottles in sealed aluminium gas bottle holder in stern locker. Gas bottle holder vented to outside for any leakage.

Keel water cooled 12v DC refrigerator in galley area

Keel water cooled 12V DC freezer in starboard side of main saloon

220vAC Microwave oven installed in lower galley cupboard to RHS of gas cooker. (2004)

Cooker exhaust fan.

Heads and showers:

2 hot and cold pressurized showers.

Ventilation:

12V fans for Calc cabins.

Dorade vents throughout.

Entertainment:

CD/DVD player with speakers in saloon and cockpit. Speaker switch in in cupboard with CD/DVD player. (2007)

Philips 20” flat screen TV mounted at foot of starboard pilot berth in saloon. Mounted on hinged bracket to swing out of the way when passage making. (2007)

Lighting:

12v DC LED lighting throughout. Additional LED reading lights in all cabins.

Accommodation

Summary of accommodation:

8 berths in 2 cabins plus the saloon.

All interior joinery is of light grained teak of uniform appearance and colour, finished with a hand rubbed satin finish varnish. The varnish in the complete interior is in very good condition and has been maintained annually.

The sole boards are the original Nautor marine ply boards and are in very good condition.

Cream vinyl headlining with teak battening.

Quality Blue upholstery in saloon/forward cabin with new foam renewed in 2004. Same make Beige upholstery in aft cabin renewed in 2004 with new foam in 2009.

Blue canvas lee cloths for all sea berths.

Description of layout from forwards:

A spacious forward cabin with two folding berths. Stowage beneath berths.

Aft of forward cabin there are lockers to starboard. The forward heads are to port with hot and cold water, shower and more locker space.

Moving aft again, the main saloon has a large drop leaf dining table between the settees offering comfortable dining for eight. The table has a custom cover for protection when sailing. There is generous storage behind the seat backs and outboard of the settees there are sea berths and additional storage. Just forward of the table is the keel stepped mast enclosed in a teak box the same shape as the mast section. This is a rare option and finishes off the saloon.

On the starboard side aft of the settees, is a large forward-facing chart table with upholstered seat and adjacent switch panel. The seat has a vinyl cover for protection when sailing.

Opposite the chart table on the port side running either side of the passageway to the aft cabin, is the galley area with cooker, twin sinks, drying rack and fridge under a Formica topped worktop.

The aft cabin has a small double berth to starboard with a single berth to port. The generator is situated between the berths. There is a good array of stowage lockers. The aft heads is en-suite to the aft cabin with basin shower and hot and cold water and stowage lockers.

Rig And Rigging

Nautor Aluminium alloy spars with keel stepped mast and two in-line spreader rig. 2 folding steps fitted at masthead and 2 folding steps fitted at mast goose-neck. Complete rig painted white Awlgrip.Touched up in 2022)

Standing Rigging completely renewed 2022, mix of rod and wire, as original

Main boom with slab reefing replaced. (1998)
Over €30,000 spent on rigging work during 2022 refit. (Receipt available)
Reckmann furling forestay.Renovated 2022)

Reckmann staysail furler (2004). (Renovated 2022)

Selden rod kicker boom vang.

Lazy jacks and Blue Packaway mainsail cover.

Kreuger original hydraulic backstay tensioner.

Dyneema check stays for use with staysail.

2 x Nautor aluminium spinnaker poles with mast track and associated equipment. Nautor jockey pole.

Genoa and staysail sheet tracks.

All running rigging is in very good condition. Removed, cleaned and stored ashore every winter. (2004)

Sails

Mainsail in heavy weight Dacron. Sobstad Triple stitched with 3 reef points. (2003)
Cruising genoa. High cut clew. UK Sails. (2014)

Staysail. Sobstad. Cut with shallow draft for use as a storm jib. (2003)

Symmetrical 1.0oz GP spinnaker

Cruising chute. 0.75 oz. Little used. Sanders Sails (2003). Flown from stem-head.

These sails have now been across the Atlantic twice so you should consider the condition as well used but servicable.

Deck Equipment

Winches:

1 x Lewmar 30 ST manual winch for furling lines (2004)

1 x Lewmar 40 2 speed manual winch for mainsheet.

2 x Lewmar 55 3 speed manual winch for Spin sheets/Check stays.

2 x Lewmar 66 ST 2 speed manual winches. Primaries. (1998). Replacing old coffee grinder system.

2 x Lewmar 48 3 speed manual winches for halyards.

2 x Lewmar 43 2 speed manual winches for control lines.

2 x Lewmar 40 2 speed manual winches for control lines adjacent to mast.

1 x Lewmar 44 ST 2 speed manual winch for main halyard.(2000)

2 x 9in Lewmar double handed winch handles.

Collection of 6 winch handles. Different makes/lengths.

General:

Stainless steel Pulpit and Pushpit. Gate in pulpit for stern-to mooring Stainless steel guardrail stanchions with stainless steel wire.

Stainless steel side mounted boarding ladder with teak steps.(removeable) Teak cockpit table.

Stainless steel protective bars forward of mast and by main companionway.

Avon 2.6m rib in Avon bag. Good condition.(2010) Complete with oars, pump anchor etc.

5HP Mariner 2 stroke outboard engine. Very good condition (2006). 1 fuel tank. Blue outboard engine cover. (Serviced November 2022)

Stainless steel Simpson Davits HL60S outboard engine crane. (2012)

Stainless steel 2.5m passerelle. Teak grill. Folds in half. Complete set of control lines.

Binoculars. 10 x 60

High powered torch with charger.

Anchoring & Mooring Equipment:

Lofrans Albatross 1.5kw 12v DC electric anchor windlass, 10mm chain gypsy and rope drum. Foredeck plug for windless control handset.

Quick chain counter mounted next to helm position.(2009)

25kgs Delta main anchor with 80m of 10mm galvanised chain.

25kgs Danforth secondary anchor with approx. 30m nylon warp.

Mooring cleats forward and aft.

Warps and fenders.

New fenders with dark blue sock covers 2022

Covers, Canvas & Cushions:

Blue canvas sprayhood for mid companionway.(2014)

Blue canvas cover for liferaft.

Aft cockpit blue bimini (2014) with breakdown stainless steel frame extending from near boom end to stern rail.

Blue winch covers for all winches.

Blue covered cushions for all cockpit seats.

Suncover/boom tent. 2 covers that attach to each side of the mainsail packaway bag and then attach to the guard rails. This provides very adequate sun cover for the full length of the boom.

Blue canvas cover to protect rubber mast gaiter.

Blue wheel/chart plotter covers.