Search Similar
  1. Home

Beneteau Oceanis Clipper 523 for sale in Cork Ireland

OFFERED BY

Sea Ventures (UK) Ltd

LOCATION

Cork Ireland

YEAR

2007

LENGTH

53.38 ft.

DETAILS

Condition

Used

Year

2007

Make & Model

Beneteau Oceanis Clipper 523

Boat type

Sail

Length

53.38 ft.

Fuel Type

Diesel

Location

Cork Ireland

Tax status

Paid

MEASUREMENTS

Beam

15.98 ft.

Draft Max

7.71 ft.

LWL

170.08 ft.

DESCRIPTION

2007 Oceanis 523 Clipper

This is an excellent, privately owned example which has undergone a rigorous program of maintenance and upgrades in the last couple of years. This includes a new engine in 2022, new bow thruster, Sails and running rigging - just to scratch the surface. She is presented for sale in excellent condition and comes with a great level of equipment.

The boat offers an excellent level of accommodation with a large, sociable saloon, large forward en-suite master cabin and two aft double berth cabins - which are also en-suite. Additionally there is also the provision of a crew cabin accessed by a deck hatch in the bow.

With all the work that has been done and the truly excellent condition of the boats interior, this must be one of the best examples on the market. She presents her next owner with the perfect opportunity to acquire a boat which has had all the maintenance work already taken care of and is ready to go sailing!

Boat Details

  • Boat:  Beneteau Oceanis 523 Clipper
  • Model Year:  2007
  • Builder:  Beneteau
  • Engine:  Volvo Penta D4.260 DP (260hp)
  • Berths:  4 / 6 in two cabins + saloon
  • Location:  Swanwick Marina soon

Dimensions

  • LOA:  53 ft 4 in / 16.27m
  • Beam:  16 ft 0 in / 4.87m
  • Draft:  7ft 7 in / 2.35m
  • Ballast:  4,974 KG
  • Displacement:  14,000 KG

Additional Equipment

  • Generator (10KVA Whisper)
  • Bow thruster
  • Cabin heating
  • 240v shore power with charger
  • Inverter
  • Hot water system
  • Large refrigerator
  • Separate freezer
  • Microwave oven
  • Electric marine WC
  • Full teak decks
  • Custom made Heavy Duty winter cover (fantastic design)
  • 4 x electric winches in cockpit
  • Skipper cabin forward
  • Hot & cold cockpit shower
  • Electric anchor windlass
  • Outboard engine bracket
  • Cockpit cushions
  • Large cockpit table

Navigation Equipment

  • Large chart plotter
  • Radar
  • Autopilot
  • Depth-sounder
  • Wind speed/direction
  • DSC VHF radio
  • Steering compass

Completed Works 2022

  • New Yanmar 110HP engine
  • New bow thruster
  • New batteries
  • New propeller shaft and shaft seal
  • New running rigging
  • New mainsail
  • New spinnaker & running gear
  • All through hull fittings replaced
  • Mast removed for Inspection
  • Standing rigging removed & Inspected (all fine)
  • New forestay
  • Keel removed and re-seated
  • New toilet
  • New anchor & chain (30KG ROCNA anchor with 12mm chain)
  • Generator fully overhauled and re-conditioned.

Completed Works 2023

  • New cockpit cushion set
  • New lazybag
  • Mast tri-colour replaced
  • Hull vinyl wrapped in 'Flag Blue'
  • All lighting changed to LED (Internal & External)
  • New primary fresh water pump
  • New shower drain pumps in all 4 toilets
  • New tender (3.5m RIB)

Sail Area


I : 65.22 ft
J : 20.77 ft
P : 59.88 ft
E : 22.28 ft
Working Sail Area : 1625.35 sq ft

Construction

  • The hull is single-skinned GRP construction.
  • A structural inner moulding is bonded and laminated to the hull at various points.
  • Its structural role is important as it takes and absorbs the stresses at pressure points (chain plate tie rods, keel, rudder etc.) and spreads any loads, guaranteeing reduced strain on the hull.
  • The surface to the inner hull makes cleaning easier and provides a better finish.
  • The structure of the hull with the inner moulding provides housing for the diesel and water tanks in the central part, enabling an optimised weight ratio and giving excellent control of the longitudinal stability of the boat.
  • The deck is balsa sandwich construction for an optimal strength/weight ratio and good thermal and sound insulation.
  • The stainless steel propeller shaft is fitted to and protected by a skeg in the GRP hull.

Electrical Detail

Electrical panel:

  • 24 switch 12 V electrical panel and a further 4 switches with 220 V differentials
  • Circuit breaker
  • 12 V sockets (chart table, owners cabin forward, cockpit table)

Power Supply:

  • The electrical circuit is supplied as standard by:
  • 4 x 140 Amp service batteries
  • 1 x 140 Amp separate engine battery
  • Voltmeter
  • Ammeter
  • Battery charge warning light
  • Electric gauges for the 3 water tanks and electric fuel gauge for better resource management

Recharging batteries:

  • By 220 V shore supply with 40 Amp battery charger
  • Alternator coupled to the engine with power distributor

Protection:

  • Rigging earthed against lightning

Lighting and sockets:

  • For the P6 Version (1 fwd cabin, 2 aft cabins, chart table stbd) : 8 sockets, 36 halogen deckhead lights, 7 reading lights and 2 fluorescent deckhead lights, 3 lamps with shades, 4 night-lights (in plinths), 2 indirect lights in saloon

Navigation lights:

  • The following are offered:
  • Navigation lights (stern, bow), combined steaming and deck light, anchor light

Manufacturer Provided Description

Designed by the Finot Group, this new hull reuses all the elements that made the success of the Bénéteau 50 and the latest evolutions in the Océanis range : fast hull with clear deck plan, rear cockpit with two wheels, coachroof on two levels with large panoramic window, spacious well ventilated accommodation, with a choice of top-of-the-range equipment, to go further quicker !

PROPULSION

Engine Count

1

Engine Horse Power

110.0

Propeller Type

3 Blade

ADDITIONAL INFORMATION

HULL

Designer

Groupe Finot

Hull Material

fiberglass

Hull Type

Monohull

OTHER

Drive Transmission Description

Direct

Dry Weight

32800.34 kilograms

Engine Year

2022

Engine Type

Inboard

Fuel Tanks Capacity

109.64 liters

Keel Type

Other

Water Tanks Capacity

198.15 liters

ABOUT BENETEAU OCEANIS CLIPPER 523

The Beneteau Oceanis Clipper 523 is 53 feet long and has a 16 feet beam and a draft of 2.35 meters. This 2007 diesel Beneteau Oceanis Clipper 523 powered by Yanmar 4JH110 with 110.0 horsepower. The Beneteau Oceanis Clipper 523 is made of fiberglass.

SIMILAR BOATS FOR SALE

2007 Beneteau Oceanis Clipper 523

52.0 ft.

|

2007

Charlevoix, Michigan

Frank Gordon Yacht Sales

2005 Beneteau Oceanis Clipper 423

43.18 ft.

|

2005

Marathon, Florida

Sunshine Cruising Yachts

2003 Beneteau 50

50.0 ft.

|

2003

Vero Beach FL

Denison Yacht Sales

2023 Beneteau Oceanis 461

47.93 ft.

|

2023

Fort Lauderdale, Florida

Nautical Ventures

1998 Beneteau Oceanis 50

50.0 ft.

|

1998

Lantana, Florida

United Yacht Sales

2002 Beneteau 50

50.0 ft.

|

2002

Cambridge, Maryland

Brewer Yacht Sales

View more similar boats Arrow