Beneteau Oceanis Clipper 361 for sale in PALERMO Italy

In August 2013 1618 engine hours, and the engine has been subjected to a special check by authorized Yanmar technician. in the same year we were performed the following work: 1) Removing the heat exchanger Verification of their status, cleaning, replacement of zinc and replacement, was also effetuata cleaning and control of the entire cooling circuit; tubes and was replaced the boiler for hot water (all in stainless steel and is also effective were replaced with 220 st.); 2) Change engine oil 3) Replace oil filter and diesel filter 4) Replace the impeller 5) Replacement straps (the same have already been replaced in July 2014) 6) Oil-level inverter control (already re-executed in July 2014) 7) removal and replacement of the rudder shaft, replacement bushing and stafy box replacement propeller zinc (August 2013); 8) all through-hulls, seacocks and its gates have been replaced; A game sails is the original (1999) and in May 2014 he was taken to the sailing industry for inspection and maintenance, and is still in excellent condition. A second game, with full batten mainsail, was built in 2010 and has been used a few times (practically new). To date, the engine has performed 2,000 hours of motion. Yet is the chain are in excellent condition, the 50 mt. of 10 mm chain were replaced in August 2013. March 2015: 1) Revision windlass with bearing replacement and oil gear; 2) complete coupon engine; 3) total cleaning of the hull and antifouling (4 hands of pirate semi-hard antifouling; July 2015: IMPLEMENTED THE OUTDOOR SHOWER WITH HOT WATER MIXER;