Boat not available.
LOCATION
Southampton United Kingdom
YEAR
1913
LENGTH
49.87 ft.
Condition
Used
Year
1913
Make & Model
Ponte-Labbe-Naval-Le-Havre-Cotre Breton Cutter
Boat type
Sail
Length
49.87 ft.
Fuel Type
Diesel
Location
Southampton United Kingdom
Tax status
Not Applicable
Beam
10.5 ft.
Berths
5
Cabins
2
Draft Max
5.91 ft.
This good looking Breton Cutter from 1913 would have been described as a 'copper bottomed investment' in her time, as she is sheathed in copper over pitched pine to the rubbing strake with Mahogany topsides and a 15mm teak deck on a 12mm epoxied marine ply sub-deck. The copper was finished in 2009 and she was relaunched in 2011.
She has a forward double berth, a Heads with Shower, 2 large berths in the saloon and 2 further pilot berths. She also has a full length bath under one of the forward berths.
She has had her coachroof raised so that there is good headroom in the saloon and galley.
She has a 50HP Beta engine and a modern electronics package, wind generator and battery charger.. She is ready for a new owner to take her to sea...
Forward cabin double berth with heads and shower
Saloon with 2 large berths to port and starboard
2 Pilot berths
Genoa
Sloop main
3 flying jibsails
Storm sail
cruising chute
8man liferaft
2.9metre Ribeye outboard
2.5m Lug rigged Sailing dinghy
Anchor winch/capstan with remote
Spare heavy duty fisherman`s anchor
Kedge anchor
Bower anchor with 60 metres s/s chain
VHF DSC radio plus portable radio
Simrad Chart plotter
Garmin GPS
Wind generator
Petrol generator
Battery Charger.
Engine Count
1
Engine Horse Power
50.0
Propeller Type
3 Blade, Bronze
HULL
Hull Material
Wood
OTHER
Bathrooms
Yes
Double Berths
1
Single Berths
4
Length on Deck
13 meters
Drive Transmission Description
Direct
Drive Up
1.8 meters
Dry Weight
16000 kilograms
Engine Type
Inboard
Fuel Tanks Capacity
75 liters
No of Heads
1
Keel Type
Full Keel
The Ponte-Labbe-Naval-Le-Havre-Cotre Breton Cutter is 50 feet long that boasts a 10 feet beam and a draft of 1.8 meters. This 1913 diesel Ponte-Labbe-Naval-Le-Havre-Cotre Breton Cutter with 50.0 horsepower. The Ponte-Labbe-Naval-Le-Havre-Cotre Breton Cutter is made of wood.